Bedienungsanleitung Cambridge Audio D100 (Seite 4 von 8) (Englisch)

763804

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

INSTALLATION

Please take a moment to read these notes before installing your D Series

Compact Disc player, they will enable you to get the best performance and

prolong the life of the product.

This unit may be installed on any sturdy, level surface. Since the power

transformers generate a magnetic hum field of moderate strength, a

turntable should not be located nearby.

The unit requires ventilation. Do not situate it on a rug or other soft surface

and do not obstruct any air inlets or outlet grilles.

Do not place in an enclosed area such as a bookcase or in a cabinet.

Never allow this unit to come into contact with water or other liquids and

ensure that small objects do not fall through any ventilation grille. In either

event, switch it off immediately, disconnect it from the mains supply and

contact your dealer for advice.

Do not route the power cable so that it can be walked upon or damaged

by other items near it.

Like all audiophile electronic components, this unit will perform best once

it has warmed up. When using for the first time it is advisable that it is left

on, playing music, for at least 36 hours prior to critical listening. For

subsequent use, a warm up period of 10-15 minutes is recommended for

maximum enjoyment.

Do not plug your CD player directly into a power amplifier unless it has

a variable output level.

If you do not intend to use this unit for a long period, switch it off and unplug

it from the mains socket.

To clean the unit, wipe its case with a moist, lint-free cloth. Do not use

any cleaning fluids containing alcohol, ammonia or abrasives. Do not spray

an aerosol at or near your CD player.

This product is not user serviceable, never attempt to repair, disassemble

or reconstruct the unit if there seems to be a problem. A serious electric

shock could result if this precautionary measure is ignored. In the event

of a problem or failure, please contact your dealer.

REAR PANEL CONNECTIONS

Some features may not apply to all models

Refer to the diagram on your accompanying Owners’ Certificate

1. LINE OUTPUT

Use quality interconnect cables from these sockets to any line level

input on your amplifier

2. OPTICAL / CLOCK INPUT

Industry standard 'Toslink' input for connection to DACs with a suitable

clock output. The result of this is the virtual elimination of the main

causes of distortion in every digital audio set-up.

3. OPTICAL OUTPUT

Use this socket to connect to the input of a separate DAC or digital

recording machine. Use a high quality fibre optic interconnect cable

designed specifically for audio use.

4. DIGITAL OUTPUT

This coaxial output is for input to a separate DAC or digital recording

machine. Use a high quality 75 ohm BNC interconnect cable for this

connection (not one designed for normal audio use).

5. AC POWER SOCKET

Once you have completed all connections to the amplifier, plug the AC

Power Cable into an appropriate mains socket. Your Compact Disc

player is now ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio D100 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info