Bedienungsanleitung Cambridge Audio Minx Xi (Seite 16 von 20) (Englisch)

577809

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Select your local network using the Navigation/Select dial and press it in for enter.

The Minx Xi will then connect to the network using a saved key (if you have

previously set one) or present you with an alphanumeric entry menu. Here you can

enter the network key you set up when setting up your wireless network.

Select each character in turn using the Navigation/Select dial and then press

navigate to the

symbol and press Navigation/Select dial to enter that key. If you

make a mistake, press

to go back one character.

The Minx Xi can handle keys in WEP, WPA and WPA2 formats (the choice of format

is made by appropriate settings on your router) and automatically generates the

right format from your text according to the router request.

Enter the network name

This option allows the Minx Xi to search for and connect to a particular network

name only.

Type your network name in using the alphanumeric entry screen.

If no matching network is found 'Network not found' will be displayed.

View Config

This menu rstly displays the IP mode (static or dynamic). This will be Auto/DHCP

(i.e. dynamic, this is the default) or alternatively Static IP.

For either mode by turning the Navigation/Select dial the Minx Xi will scroll through

the various current IP parameters, for instance the ESSID of the current wireless

network, Wired and Wireless MAC addresses, current IP address, (Sub)Netmask,

Gateway address etc.

Edit Config

This menu allows the selection of IP mode between static or dynamic (Auto/DHCP).

Auto/DHCP is recommended for most people in most circumstances. Static IP

requires quite a bit of knowledge about IP networks, and is for advanced users only.

The default setting is thus Auto/DHCP, here the Minx Xi obtains its IP address each

time you switch in on by a process called DHCP which means it is different each

time it is acquired. This process is completely automatic and much simpler than

implementing Static IP.

However sometimes it is useful (especially in large networks) to know the exact IP

address of each device, this can only be done by using static IP.

When using Static IP you will also need to enter the network mask you wish to

use and the addresses of your gateway and DNS service, note there is no way for

Cambridge Audio to know what these are in your network. Only select static IP if you

know exactly what you are doing!

To set static IP, select the 'Settings > Network cong > Edit Cong' menu and then

press SELECT.

The Minx Xi will now display 'Auto (DHCP)? YES / NO'. Turn the Minx Xi's rotary dial

to select 'NO' and then press SELECT.

This menu contains various setup / conguration menus as shown below.

Settings

Audio Settings

Network Cong

Version

Upgrade Firmware

Language

Factory Reset

Device Name

Idle Mode

Auto Power-down

Edit Audio Input Names

Audio Settings

Adjustments to the bass, treble and balance level can be made as follows:

Press and hold the

button to get to the top menu. Go to 'Settings - > Audio

Settings' and then press Select to bring up the Tone Control and Balance menu

items.

Select 'Tone Control' to adjust bass and treble output level. Select the desired

output level using the rotary dial and then press the Minx Xi's

button to go back

to the previous menu items.

Select 'Balance' to adjust the Left and Right balance output level. Select the

desired balance level using the rotary dial and then press the Minx Xi's

button to

go back to the Audio Settings menu.

Network Config

This menu enables you to set your Minx Xi's network settings, scan again for a

connection to another wireless network, or to manually congure the network

parameters. This is useful if you move your Minx Xi to a new location for instance.

By default the Minx Xi will be set for Automatic wired/wireless detection

and automatic IP addressing (DHCP) which will work without setup in most

circumstances (for Wi-Fi you will need to enter your WEP/WPA key if you have one).

In Auto mode the Minx Xi will look for a wired connection rst and then scan for

wireless connections if it doesn't nd one. It will also try to obtain an IP address

automatically from your router/DHCP server.

If you wish to make changes to your setup the Minx Xi displays the following

submenus.

Network Cong

Scan for networks

Enter network name

View Cong

Edit Cong

Signal Warning

WiFi Region

Wired/Wireless

Scan for networks

This option scans all available Wi-Fi frequencies for wireless networks and allows

you to connect to them.

The Minx Xi can connect to 802.11b/g or n networks (2.4GHz frequency range only

for n networks).

A list of available networks will be presented. If a particular network requires an

encryption key, a

symbol will be seen at the end of the network name.

Settings menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Minx Xi Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Minx Xi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info