Bedienungsanleitung Cambridge Audio Sonata NP30 (Seite 8 von 20) (Englisch)

497526

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Remote control

Important!

The default mode for the remote allows combined control of

the NP30 and Cambridge Audio Azur range amplifiers.

The remote can be set to control the Cambridge Audio

Sonata range receivers (AR30/DR30) or Cambridge Audio

A/V Receivers instead. See later section on this page.

Standby/On

Switches the NP30 between On and low power eco-friendly

Standby mode.

Note: The NP30 takes approximately 30 seconds to come

out of Standby, during this time the front panel Standby/

On LED will flash but nothing will be shown on the display.

0-9 numeric buttons

Press to recall stored presets.

-/-- Numerical select

To recall a preset number greater than ten, press -/-- followed

by the required preset number.

(Memory)

Press to access the Memory features for preset recall and

storage.

The Sonata NP30 can store up to 20 Presets which can be

Internet Radio stations, Streams from Streaming Services

or your own choice of Internet Radio URL. See later section.

Home

Go directly to the top Home Menu.

Return

Press to return to the previous menu.

 Navigation

Press to navigate around the NP30’s menus.

When in AR30/DR30 tuner mode, press to step through the

preset stations.

When in AR30/DR30 iPod (MP3) mode press to browse your

iPod’s contents.

Enter

Press to accept the item/function highlighted in the display

menu, or while navigating your iPod. In tuner mode, press

and hold to store the current station in the preset bank.

Note: If browsing through DAB stations, press Select to

immediately tune to the current station (DR30+ only).

(Reply)

This is the reply/interactive button. Press when listening

to an Internet Radio station or Streaming Service that has

some form of interaction with the user. This function will

bring up an interactive menu (where available). This feature

is commonly used allow indication that you like or don’t like

the current stream so the service can tailor the music served

to your personal taste.

For Media Play back (UPnP or Local) this button will toggle

between the ‘Now Playing’ display and the current media

browsing display.

i (info)

Changes the display to show information about the currently

playing track.

Skip

Press once to skip forwards or backwards one track.

Stop/Delete

Press once to stop media playback. Also used to delete items

where appropriate (press and hold).

Play/Pause

Press once to start media playback. Press and hold to pause

media playback.

Shuffle

Press to turn the random/shuffle playback function on and

off.

Repeat

Press to turn repeat playback function (media play back only)

on and off.

Changing the remote control functions

To change the remote to control the NP30 and Cambridge

Audio Sonata range receivers (AR30/DR30) remove the

batteries and wait 3 minutes, now press and hold down the

NP button whilst re-inserting the batteries.

To change the remote to control the NP30 and Cambridge

Audio A/V Receivers remove the batteries and wait 3

minutes, now press and hold down the CD button whilst re-

inserting the batteries.

To return the remote to controlling the NP30 and Cambridge

Audio Azur amplifiers remove the batteries and wait 3

minutes, now re-insert the batteries without holding down

any buttons.

When in AR30/DR30 mode, note the remote switches

functions depending on which source (NP, CD, DVD etc.) you

select via the remote only.

To control the NP30 in this mode, first press the NP button on

the remote (which also selects the NP source).

To control other functions of an AR30 or DR30+, their built-in

tuners and DD30 dock for iPod or a DV30, first press the

required source (e.g. MP3 for iPod, DVD for DV30, etc.) to

select the right mode.

The following buttons control the function of

Cambridge Audio Amplifiers/Receivers.

Volume

Increases or decreases the volume. It is also used to change

the value of selected menu settings of the AR30/DR30.

Mute

Mutes the audio. Press again to cancel mute.

Source buttons (NP, CD, BD/DVD, Tuner, MP3)

Press the relevant source button to select desired input

source.

Tone/Balance

Press for Tone/Balance adjustment, using the Volume

buttons.

The following buttons control the functions of

a matching AR30/DR30 2.1 Receiver only.

Alarm/Clock

Press once to enter the Alarm menu. Press and hold to enter

the Sleep menu.

Brightness

Switches the display brightness between bright and dim.

NP CD BD/DVD Tuner

MP3 Band

Tone/

Balance

Vol

Enter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge Audio Sonata NP30 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge Audio Sonata NP30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info