Bedienungsanleitung Camina-Schmid Ekko (Seite 31 von 44) (Englisch)

810633

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Technical data

Operation with closed ﬁre box in accordance with EN 13229 Ekko U

45(34)45 h

45(34)51 h

45(34)57 h

Ekko U

55(45)45 h

55(45)51 h

55(45)57 h

Ekko U

55(67)45 h

55(67)51 h

55(67)57 h

Ekko U

60(90)51 h

Ekko U

67(45)45 s

67(45)51 s

67(45)57 s

Ekko U

67(45)45 h

67(45)51 h

67(45)57 h

Ekko U

84(34)45 h

84(34)51 h

84(34)57 h

Nominal heat output kW 4 9 9 14 9 9 10.5

Thermal output range kW --- --- 4.3–9.1 --- 3.4–9.8 3.0–9.0 ---

Room heat output kW 4 9 9 14 9 9 10.5

Heat distribution: through the viewing window % 70 70 70 40 60 65 60

Heat distribution: convective output % 30 30 30 60 40 35 40

Suitable for multiple ﬂue connections to the chimney 

Flue gas connector Ø inmm 180 200 200 250 200 200 200

Combustion air connector Ø inmm 125 125 125 150 125 125 125

SMR combustion control --- 

recommended free cross-section1Supply air (cm2) 480 1080 1080 2184 1080 1080 1260

Recirculation air (cm2) 400 900 900 1820 900 900 1050

Combustion air requirement m³/h 16 32 36 54 36 36 42

Recommended quantity of wood, approx. kg 1.8 3.0 4.0 4.0 4.0 4.0 4.5

Recommended quantity of wood with NHK, approx. kg --- --- --- --- 7.0 --- ---

Recommended quantity of wood with heat storage

system, approx. kg --- 6.0 6.5 --- 6.5 6.5 ---

Recommended length of logs cm 25 (33 standing) 33 33 33 33 33 33

Fuel conversion kg/h --- --- --- --- --- --- ---

Minimum distance to the ﬁre box

(in accordance with TR OL 2006, version 2010) mm 800 800 800 800 800 800 800

Minimum distance to the insulation

(in accordance with TR OL 2006, version 2010) mm 50 90 90 60 90 90 100

Insulation thickness (with awall that does not need to

be protected) (based on SILCA® 250KM) mm 60 60 60 60 60 60 60

Weight kg 150-170 210-230 240-260 370 190-210 240-260 280-320

Fuel Type Wood Wood Wood Wood Wood Wood Wood

Triple values

with nominal

heat output

Flue gas mass ﬂow g/s 4.7 12.6 8.6 11.9 9.5 8.2 14.9

Flue gas temperature °C 255 228.5 310 310 330 345 259

Required delivery pressure Pa 11 12 11.5 12 12 12 12

Triple values for connecting

ceramic ﬂues

(wood used as fuel)

Firing power kW --- 19.8 21.5 --- 21.5 21.5 ---

Flue gas mass ﬂow g/s --- 33.7 29.7 --- 30.6 29.3 ---

Flue gas temperature upstream of the

connecting surface °C --- 280 361 --- 361 361 ---

Required delivery pressure at the ﬂue

gas connector Pa --- 15 15 --- 15 15 ---

Combustion air requirement m³/h --- 75.4 75.6 --- 75.6 75.6 ---

Recommended ﬂue length2m1.7 1.7 1.7 --- 3.5 3.5 ---

Emission

values

Wood fuel

CO - based on 13 % O₂ mg/Nm³ < 1250 < 1250 < 1250 < 1250 < 1250 < 1250 < 1250

Dust - based on 13 % O₂ mg/Nm³ < 40 < 40 < 40 < 40 < 40 < 40 < 40

Eiciency % > 80 > 78 > 78 > 80 > 78 > 78 > 80

Minimum heat-emitting surface3

(based on closed design) m² 1.8 3.7 3.5 4.1 3.5 3.5 4.0

Ecodesign Regulation in accordance with (EU) 2015/1185 

Energy eiciency class in accordance with (EU) 2015/1186

Energy eiciency index (EEI) 107.5 105.0 104.1 106.1 103.2 103.4 106.4

Declaration of Performance No. LE29143528 LE11080165 LE29102336 LE1459631-1 LE29061076-2 LE29102335 LE12030194

possible

connected

equipment

Top mounted heat exchanger --- --- --- --- --- --- ---

Hot air top-mounted element --- --- --- --- --- ---

Heat exchanger --- --- --- --- --- ---

Eiciency with connected equipment % --- --- --- --- > 80 --- ---

Hot water top-mounted element (HWAR R) --- --- --- --- --- --- ---

s = hinged door, h = guillotine door

The speciﬁed waterside output was determined under test conditions. The achievable output can vary

depending on the ﬂue liner, quantity of wood and pump assembly used.

1 The calculation was based on “TR OL 2006, edition 2010 – Table 17: Free cross-section in cm² for grille or

opening tile based on the thermal output for air heating” with the preferred air velocity of 0.75 m/s. Supply air

grille 240 cm2 / kW, recirculation air grille 200 cm² / kW.

2 The information regarding ﬂue lengths is a recommendation and based on the

calculation in accordance with TR OL 2022 chapter 15. The calculation is based on a

medium-heavy design and a ﬂue ratio of 360 cm².

4 When installing the ﬁreplace insert in a set with a storage stone system, the

values speciﬁed in the relevant installation instructions apply.

3 Average value based on the storage time. Depending on the material properties

and the construction thickness.

Mean speciﬁc heat distribution = approx. 500 W / m²

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Camina-Schmid Ekko Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Camina-Schmid Ekko

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info