Bedienungsanleitung Campingaz Adelaide Plancha Table Top (Seite 13 von 69) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

662252

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

- Use two wrenches to tighten the flexible hose on

the gas end piece:

u a number 14 wrench to immobilize the

device input connection,

u an adjustable wrench to tighten the flexible

hose nut.

- check for leaks following the instructions in paragraph f).

Check that the flexible hose stretches out normally

without twisting or pulling and does not come into contact

with the hot sides of the barbecue. It should be replaced

when the expiry date on the hose is passed or whenever

it is damaged or develops surface cracks.

n Belgium, Luxembourg, United Kingdom, Ireland,

Portugal, Spain, Italy, Croatia, Greece, Netherlands,

Czech Republic, Slovakia, Hungary, Slovenia, Norway,

Sweden, Denmark, Finland, Bulgaria, Turkey,

Romania, Poland, Switzerland, Estonia:

The barbecue is equipped with a circular connector. It

should be used with flexible hose that is suitable for use with

butane and propane gas. Hose length should not exceed

1.20 metre. It should be replaced if it is damaged or

cracked, when required by national regulations or at the

end of the part lifecycle. Do not pull or pierce the hose.

Keep away from any parts of the barbecue that get hot.

Check that the flexible hose stretches out normally,

without twisting or pulling.

n Germany, Austria:

The barbecue should be used with flexible tubing that is

suitable for use with butane and propane gas. Hose

length should not exceed 1.50 metre. It should be

replaced if it is damaged or cracked, when required by

national regulations or at the end of the part lifecycle. Do

not pull or pierce the tubing. Keep away from any parts of

the barbecue that get hot. Check that the flexible hose

stretches out normally, without twisting or pulling.

Flexible tubing connection: to connect the tubing to the

connector on the barbecue, tighten the nut on the tubing

firmly but without excess force using the two wrenches

provided:

u no. 14 wrench to tighten the connector

u no. 17 wrench to tighten the nut on the tubing

f) CHECKING FOR GAS LEAKS

1) Work outside, away from all sources of ignition. Do not

smoke.

2) Make sure the control knobs are in the "off" (l)

position.

3) Connect the flexible tubing to the connector and

barbecue as described in part e).

4) Fit the regulator onto the gas cylinder in accordance

with its instructions.

5) Use a gas leak solution to test for leaks. Important:

never use a naked flame to check for gas leaks.

6) Apply the solution to the connections cylinder/regulator/

hose/apparatus (the control knobs should remain

closed: off position (l)). Open the gas cylinder valve.

7) Bubbles in the gas leak solution indicate that there are

gas leaks.

8) The leak can be stopped by tightening any hose

connection or replacing any faulty component. The

barbecue must not be used until the leak is stopped.

9) Close the valve on the gas cylinder.

Important:

Check for leaks at least once per year and each time the

gas cylinder is replaced.

g) PRIOR TO USE

Never use the barbecue until the instructions have been

read carefully and understood. Also, make certain that:

- there are no leaks

- the venturi tubes are not blocked (example: spider

webs)

- the hose does not touch any components which may get

hot.

- that the hood has been removed (depending on model)

- This device has a large number of vents to optimize the

device use. Be sure that these vents are not blocked.

h) LIGHTING THE BURNERS

Read steps 1 to 5 before beginning with step 1.

1 - Make sure that the control knobs are in the "OFF"

position (l).

2 - Open the gas cylinder valve.

3 - Push down on one of the

control knobs and turn it to

the "HI" position ( ). You

will hear a "click": a spark is

produced that triggers

lighting of the burner. If the

burner does not light, turn

the knob to the "OFF" (l)

position and repeat the two

steps.

4 - When the first burner has

been lighted, repeat the operation for the second

burner.

5 - If the device still does not light, place the control knob

in the "OFF" (l) position and wait 5 minutes before

starting the operation again.

Important:

If the burner fails to light after the second attempt, turn the

control knob to the "off" position (l) and check that the

burner outlets and the venturi tube are not blocked.

IFU 4010020738 - Adelaide Plancha - pages 12 to end.qxp 04/09/2012 15:48 Page 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Campingaz Adelaide Plancha Table Top Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info