Bedienungsanleitung Campingaz Garden Torch CV PZ (Seite 8 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

662367

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Other functions

If you want to use your torch for operations other than

weed killing, you can mount the nozzle without the

extension in order to shorten it (fig. 5).

- Lighting barbecues

- Thermal stripping (paint or other)

- Basic welding operation

- Unfreezing of pipes or other

Important recommendations:

Always use the torch with extreme care, well away from

inflammable substances, wall or combustible object.

In the event of a leak (smell of gas), close the valve.

While in operation (and immediately afterwards) some

of the components are extremely hot (particularly the

burner nozzle). Do not touch these elements without

suitable protection.

Do not abuse your torch and do not use it for

applications for which it was not designed.

Handle the torch very carefully. Take care not to drop it.

Never leave the torch alight and unattended.

Do not inhale the combustion gases emitted during

utilisation. Respect the environment: deposit empty

cartridges in an appropriate place.

Removing the cartridge

The cartridge may be removed even if it is not

empty.

Replace the cartridge outside and away from other

people.

- Check that the gas supply is fully turned off by turning

the control wheel (5) clockwise as far as the handle

(direction “-” of the arrow) (fig. 6).

- Check to see that the flame of your torch is out before

disconnecting the cylinder.

- Hold the equipment, then unscrew the cartridge by

turning it anti-clockwise and remove it (fig. 8).

Never throw away a cartridge which is not completely

empty, (check there is no liquid in the cartridge by

shaking it).

STORAGE

- After complete cooling, the thermal weed killer must

be stored in a cool, dry and ventilated place, out of the

reach of children and never in a basement or cellar.

- In the case of the injector becoming clogged (the

cartridge still contains gas but the equipment will

not light), do not try to unclog it yourself. Return the

equipment to your retailer.

- Remove the cartridge as shown in paragraph

“Removing the cartridge”.

- Check that the gas supply is fully turned off by turning

the control wheel (5) clockwise as far as the handle

(“-” direction of the arrow) (fig. 6).

- Hold the thermal weed killer by its handle. Insert the

cartridge into the equipment and tighten it by turning it

gently clockwise until you hear a click (about one sixth

of a turn) (fig. 7). Do not tighten the cartridge further,

as you may damage its valve.

The thermal weed killer is ready to use.

If there is a leak (smell of gas), put the lamp outside

immediately, in a well ventilated area, without heat

source, where the leak can be traced and stopped. If

you wish to check that your lamp is not leaking, do so

outside. Never trace leaks using a flame, use a gas leak

solution.

USE

Lighting

- Open the gas by turning the control knob (5) anti-

clockwise about 1/4 turn (direction “+” of the arrow) (fig.

9).

- Wait 3 to 5 seconds then press the piezo start button

(6) one or more times until the nozzle ignites (fig. 9).

Flame adjustment

Adjust the flame to the way you want it, depending on

the work to be done, by turning the adjustment knob (5)

in the direction of the “+” or “-” arrow.

Utilization limit

The nozzle of your torch cannot be used at an angle

above 30° with respect to the horizontal. Beyond this

limit, you risk obtaining large yellow flames (fig. 11).

Extinction

- Close the tap by turning the control knob (5) clockwise

as far as it will go (direction “-” of the arrow) (fig. 6).

- Be sure that the flame is out.

Wait 15 seconds before laying down or storing

your device after use.

How are weeds killed?

The idea is not to burn the plant, but only to heat it by

placing the torch tip about 5 cm above the plant for a

few seconds (fig. 10). Move forward at a strolling pace.

To check the effectiveness of weed killing, press a plant

leaf between two fingers right after passing the weed

torch over it: your fingers should leave a dark green and

somewhat translucent mark on the leaf.

Remarks

Avoid killing weeds when there is a strong wind or

when grass is damp: under these conditions, heat

loss is substantial and results are not good.

Years 2

Warranty Period

www.campingaz.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Campingaz Garden Torch CV PZ Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info