Bedienungsanleitung Campingaz Party Grill R (Seite 6 von 40) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

662431

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Consumption: 99 g/h (1.36 kW) - injector n° 015556

Category: direct butane pressure.

Thank you for having chosen this Campingaz

PARTY-GRILL R.

A - IMPORTANT: YOU ARE USING GAS,

TAKE GREAT CARE !

The purpose of these directions for use is to enable you

to use your Campingaz

“PARTY-GRILL R” appliance

properly and in complete safety.

Please read them carefully, so as to familiarise yourself

with the appliance before assembling it onto its gas

container.

Please follow the instructions that appear in these

directions for use. Any failure to follow these

instructions may pose a danger both to the user and

to people in the vicinity.

Always keep these directions for use in a safe place

so that you can refer to them if need be.

This appliance must only be used with Campingaz

cylinders 901, 904 and 907. It may be dangerous to

use any other gas containers.

La Société Application Des Gaz will not accept any

liability in the event that a cylinder manufactured by

any other brand is used.

This equipment should only be used outside

premises and kept away from inflammable materials.

Do not use an appliance that is leaking, not working

properly or damaged. Return it to the shop you

bought it from, which will give you details of the

nearest after-sales service outlet.

Never modify this appliance or use it for applications

for which it is not intended.

Do not use this product in caravans, cars, tents,

huts, sheds or any small enclosed areas.

The product should not be used while sleeping or

left unattended.

This product consumes fuel through combustion

or consumption of oxygen and gives off certain

substances and gas, which could be dangerous

such as carbon monoxide (CO).

Carbon monoxide is an odorless, clear gas that

can cause flu-like symptoms, sickness, illness,

and possibly death if produced inside aforesaid

enclosed areas through use of the product without

proper ventilation.

B - PUTTING THE APPLIANCE INTO SERVICE

Take the appliance out of its packaging, and remove the

lid (2), hotplate (3) pan support (crosspieces) (4) and

water container (5)

C - FITTING TO CAMPINGAZ

CYLINDERS

901, 904 and 907

(If an empty cylinder is in place, read section H:

“Removing or changing the cylinder”)

When inserting or removing a cylinder, always do so in

an airy location, preferably outside and never close to a

naked flame, heat source or spark (cigarette, electrical

appliance, etc.), and well away from any other people

and inflammable materials.

a) Check that the stove seal (1) and the tap thread (1a)

(see fig.1) are in place and in good condition.

b) Do not use the stove if the seal is missing or damaged:

return it to your stockist.

c) Check that the gas inlet is fully closed by turning the

control knob (7) clockwise as far as the stop (direction

“-” of the arrow).

d) Position the cylinder on a horizontal and solid surface,

then remove the cap.

e) Take the tap/burner unit (8) and screw it as far as it will

go onto the cylinder valve (9) (fig.3)

If you detect a leak (i.e. you can smell gas before the tap is

opened), place the appliance outside immediately, in a well-

ventilated location free of any ignition sources, where the

leak can be diagnosed and stopped. If you wish to check the

tightness of your appliance, you should do so outside. Use

gas leak solution, not a naked flame, to search for any leaks.

D - ASSEMBLING THE CAMPINGAZ

PARTY-

GRILL R STOVE

a) Fit the water container (5): connect it securely by turning

as far as the stop, following the arrow marked “v” (fig.4).

b) Check whether the burner (6) is properly fitted (fig.4).

c) Put the crosspieces in place (4).

E - PREPARING TO USE THE “HOTPLATE”

FUNCTION

a) Place approximately 3/4 of litre of water in the water

container (5). The level should remain a few millimetres

below the top of the central vent: (fig.4) “maxi” mark.

b) Position the hotplate (3) by indexing the notches on the

crosspieces (4).

F - USING THE PARTY-GRILL AS A “HOT-

PLATE” (fig.7a)

1) Lighting the burner

a) Open the tap by turning it (7) anti-clockwise: 1

rotation maximum.

b) Press the button (7) with the thumb until the piezo

system operates. This is made easy if the other

fingers are placed in the slot provided. (fig.5)

c) If the burner flame is not visible under the hot-plate,

(fig.5), recommence the procedure “b”.

d) After 3 attempts, close the tap by turning it clockwise

as far as it will go. Check that the cylinder contains

gas and start the lighting operations a) and b) again.

Operation and maintenance

Figures 1 to 7 : see page 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Campingaz Party Grill R Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info