Bedienungsanleitung Camry CR 1173 (Seite 6 von 204) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

800777

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

SETTING THE CLOCK

After plugging in the AC power, “00:00” will appear and start blinking on the LCD display.

1. In Power Off (Standby) mode, press and hold the CLOCK SET Button (B13) on remote control or main unit, the 24 HOUR format “24H”

will show in display.

2. Tap the Previous / Next Button (B4, B18) on remote control or main unit to select 24 Hour format if necessary. Otherwise, press the

CLOCK SET (B12) Button to conﬁrm 12 Hour clock format and enter clock setup mode, Hour digits will be ﬂashing.

3. Tap the Previous / Next Button (B4, B18) on remote control or main unit to adjust the hour. Press and hold the button for fast advance /

reverse setting.

Note: Make sure the hour is set so that the PM indicator is displayed correctly.

4. Press the CLOCK SET (B12) Button on remote control to conﬁrm the hour setting, the minute digits will ﬂash to prompt for input.

5. Tap the Previous / Next Button (B4, B18)on remote control or main unit to adjust the minute. Press and hold the button for fast advance

/ reverse setting.

6. Press the CLOCK SET (B12) Button on remote control again to complete the setting.

NOTE: The clock and radio station presets will need to be reset if the power is interrupted or in the event of a power outage. “00:00” will

appear and start blinking on the LCD display to notify you that the power was interrupted and the clock will need to be reset. Please

follow steps 1-6 above to reset the clock.

CHECKING THE CLOCK

The unit will show the current time in standby mode. To check the current time in Power ON mode, press and hold the CLOCK SET (B12)

Button on main unit or remote control for 3 seconds, the current time will show for 5 seconds and then return to the previous screen.

ALARM OPERATION (REMOTE CONTROL ONLY)

SETTING THE ALARM CLOCK

This function allows the system to turn on automatically and wake you using a beeping alarm, the CD, USB or BU the RADIO.

1. Press and hold the TIMER (B13) button on the remote control until the display shows “On ”, and the hour digits ﬂash.

2. Press the Previous / Next Button (B4, B18) buttons to adjust the hour digits, and then press the TIMER button to conﬁrm. The minute

digits will ﬂash on the display.

3. Press the Previous / Next Button (B4, B18)buttons to adjust the minute digits, and then press the TIMER (B13) button to conﬁrm.

4. When the Previous / Next Button (B4, B18) On Timer Clock set is set, the display will show “OFF” and the hour digits will ﬂash.

5. Press the Previous / Next Button (B4, B18) buttons to adjust the hour digits, and then press the TIMER (B13) button to conﬁrm. The

minute digits will ﬂash on the display.

6. Press the Previous / Next Button (B4, B18) buttons on the remote control to adjust the minute digits, and then press the TIMER button to

conﬁrm.

7. Press the buttons to select CD, USB ,BT or FM mode, then press the TIMER (B13) button to conﬁrm. The display will show “VOL#” and

ﬂash.

Press the Previous / Next Button (B4, B18) buttons to adjust the volume, and then press the TIMER button to conﬁrm.

8. Press the TIMER (B13) button to select "Timer On", and the Timer is now

set.

9. In standby mode, the Timer Icon will show on the display to indicate the Timer is On.

NOTE:

1.) If “Wake to CD, USB” is selected but a CD is not inserted, the alarm will default to the Beeping Alarm automatically when the alarm

wake time is reached.

2.) For 'Wake to Radio”, the system will default to the last FM radio station listened to before switching off.

3.) The crescendo alarm will increase to the volume level you have set.

ACTIVE/DE-ACTIVE ALARM FUNCTION

1. To active ALARM, tap the TIMER (B13) Button once, and the alarm icon will show on LCD display.

2. Cancel the ALARM function by tapping on the TIMER (B13) Button again. The alarm icon will go off.

Wake to Radio, CD, USB or BUZZER Alarm

· When the alarm time is reached, the CD, USB or radio beeping alarm will sound for 60 minutes then shut off and reset itself for the

following day (without pressing the snooze button).

· To stop the alarm immediately after it sounds, tap the POWER / STANDBY Button (A1,B1) on remote control or on main unit once. It

resets itself for the following day.

· To cancel the following day alarm, tap the TIMER (B13) BUTTON once, ALARM icon goes off.

RADIO OPERATION

1. Tap the POWER / STANDBY Button (A1,B1) on main unit or remote control to turn on the unit.

2. Tap the SOURCE Button (A1, B11) on main unit or remote control to select FM mode, the FM radio frequency appear in display.

3. To manually tune to a speciﬁc radio station, tap the Track Down, Track up (A10, A11, B8, B18) on either main unit or remote control

repeatedly. Use the manual tuning method to tune in weaker stations that are bypassed during Automatic Tuning.

4. To automatically tune to the next available radio station, press and hold the Track Down Button (A10, A11, B8, B18) on main unit or

remote control for 1-2 seconds until frequency readout on the display begins to scan and then release the button. The tuner will stop

scanning when it receives the next broadcasting station of adequate signal strength.

5. Press the volume control on main unit or remote control to adjust the volume control to the desired volume level.

FM / FM Stereo reception

Camry CR 1173 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info