801593
7
Zoom out
Zoom in
Vorherige Seite
1/120
Nächste Seite
7
Use of the device:
To use the device you need to fill the device with water.
2. By removing the water tank from the device, filling and putting it back into the device.
1. Directly into the water tank.
You can do this in 2 ways.
1. Remove the water tank lid (3).
2. Gently but firmly pull on the water tank upwards and away from the device.
3. Fill the water tank with water.
K2. Coffee powder L. Lavazza Modo Mio M. Lavazza BLUE N. Caffitaly
I. Nespresso capsule J. Dolce Gusto Capsule K1. Coffee Pod
Brewing baskets:
A. Espresso B. Power ON / OFF C. Cafe Lungo
Picture A2:
1. Lever 2. Control panel 3. Water tank lid 4. Water tank
5. Brewing basket 6. Drip tray cover 7. Drip tray (removable)
Picture A1:
Multi capsule coffee maker description:
26. Do not move or move the device during operation.
25. Use only original accessories.
24. For descaling the machine, use a liquid descaler designed for pressure
coffee makers.
23. Always disconnect the power source before cleaning and allow all hot
parts to cool down. The device should be cleaned with a mild non-abrasive
detergent. Never use cleaning solvent as this could damage the paint
layer.
21. Always unplug the machine before filling the tank with water.
22. Regularly clean and inspect the machine to ensure the quality of coffee
obtained and to extend the life of the machine.
20. Never leave the device at a temperature below 0 degrees Celsius, as it
may damage it.
19. Never use the device with sparkling water !!!
18. Never use the device without water! It may be damaged.
17. To provide additional protection, it is advisable to install a residual
current device (RCD) in the electric circuit with a rated residual current not
exceeding 30 mA. Ask an electrician for this advice.
First, remove all of the packings from the device and the attachments.
Preparation:
Please clean the body of the device, water tank, attachments, water tank, water tank lid, drip tray with a soft, slightly damp cloth.
3. Put the water tank lid back into its place.
TO add water directly to the water tank (As shown on page 3 picture B):
1. Remove the water tank lid (3).
To remove the water tank (As shown on page 3 picture C):
2. Pour water into the water tank (4).
4. Put the water tank back into its designated place.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Camry CR 4414 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info