Bedienungsanleitung Camry CR 5036 (Seite 4 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

801602

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

when you rotate the iron, as in the tank, even when disconnected from the power

supply iron, may still be in hot water.

19. DO NOT allow for prolonged contact hot steam iron with fabric or flammable materials.

21. If you do not use iron, even for a short time, turn off the options of steam

20. Be careful that the power cord does not touch the hot soleplate. Allow the iron to cool

completely before storage.

22. Under no circumstances should be ironed clothes and fabrics that are on humans or

animals.

23. Never direct the steam to humans or pets.

25. Iron must be used at a stable even surface and this can only be disposed of.

26. Do not fill the water tank with chemicals, perfumes or descaling substance.

24. Use self-cleaning function at least once a month.

DESCRIPTION OF DEVICE

27. Do not fill the water tank over MAX level.

2. Open the water filling cover

1. Set the steam control (C) to "0" (= no steam).

FILLING WITH WATER:

PREPARATION:

Sort the laundry to be ironed according to the international symbols on the garment label, or if this is missing, according to the type of

fabric.

1. Connect the power cord of the appliance to the wall outlet.

FIRST USE

When using the iron for the first time, you may notice a slight emission of smoke and hear some sounds made by the expanding plastics.

This is quite normal and it stops after a short time. We also recommend passing the iron over an ordinary cloth when using it for the first

time.

DRY IRONING (without steam) FUNCTION

3. When the iron reaches the required temperature, the heating indicator light (H) will turn off.

2. Turn the temperature control knob (I) to the desired temperature depending on the type of fabric you want to iron. Make sure that the

steam control switch (C) is in the “0” position.

Caution: If the fabric consists of various kinds of fibers, always select the lowest ironing temperature of the composition of those fibers.

Start ironing the garments requiring a low temperature. This reduces the waiting times (the iron takes less time to heat up than to cool

down) and eliminates the risk of scorching the fabric.

4. Push the water filling cover to close it.

3. Fill the water tank with water to “MAX”.

A. Spray nozzle B. The water inlet hole

Plug in the iron, the heating indicator light (H) turns on, when the thermostat works,

once the thermostat off work, the heating indicator light (H) turns off.

I. Temperature control knob - thermostat J. Self-clean button

G. Rotary cable gland H. Heating / Thermostat indicator light

C. Steam control switch D. Spray button

E. Steam burst button F. Power Cord

K. Water tank L. Ceramic coated soleplate

INDICATOR LIGHT:

ENGLISH

GARMENT

LABEL

FABRIC

TYPE

THERMOSTAT

REGULATION

synthetic ·

low temperature

silk - wool ··

medium temperature

Cotton - linen ···

high temperature

Fabric not to be ironed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Camry CR 5036 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info