Bedienungsanleitung Camry CR 7436 (Seite 8 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

801625

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

15. The device should be turned off every time you put it down.

16. Do not use the device near water, for example: in the shower, in the bathtub or above the

basin with water.

17. If the device uses a power supply, do not cover it, as it could lead to a dangerous increase

in temperature and damage to the device. Always, first insert the plug into the power socket in

the device and then the power supply to the mains socket.

18. Do not use the bed sheet in folded condition. Do not put pins, needles and other metal

objects in the sheet.

19. Do not use the sheet if it is wet or damp. Leave the sheet hung loosely in a ventilated

area until it is completely dry.

20. Do not put the power cord on a warmed sheet. Do not fold the equipment when it is

placed on top during storage. Check the equipment periodically for signs of wear or damage.

If such signs or equipment are used improperly, please contact your supplier before

continuing to use it.

21. Store in a dry place. Never put heavy objects on the sheet.

22. Never go to sleep with the electric sheet turned on. Unplug the power plug from the outlet.

23. Never cover the controller.

24. Before switching on the electric sheet, make sure that it is evenly distributed, there are no

kinks or folds.

25. . Disconnect the Product can be washed in the washing machine in 30°C temperature

power cord and controller before washing. Switch or controller - the regulator must not be wet

during washing, and during drying the cord must be in a horizontal position to ensure that the

water does not flow into the switch or controller - the regulator.

26. Do not iron the electric sheet!

27. This equipment is not intended for medical use in hospitals.

28. The device should cool down before storage.

29. The device may be used only with the types of removable elements specified in the

equipment marking.

30. Do not use the device on adjustable beds or if the device is used on an adjustable bed,

check that the blanket and cord cannot get stuck or corrugated, eg on hinges.

31. The device is equipped with a fuse protecting against overheating, which should not work

when used in accordance with the intended use of the equipment. If the fuse trips, the device

will stop working, the equipment must be returned to the manufacturer or its representative

for repair.

Product: Electric blanket underlay CR7435 / CR7436

BEFORE FIRST USE

1.The product needs to be unfolded and laid flat before switching on.

2.Fix the product according to instruction in chapter: Fitting your product on the bed.

3.We recommend that you switch your product to the maximum setting for two to three hours before bedtime then reduce to your desired

heat setting 15 minutes before getting into bed. You must switch OFF prior to sleeping.

Fitting your product on the bed

1. Place the product onto the mattress with the controller (or two) at the HEAD END but towards the foot end of the bed.

2. The control switches should be below the normal head’s sleeping position.

3. Unroll the tie tapes and pass the tapes under the bed as shown in the diagrams (Fig.1-6).

4. Ensure the heating wires do not extend under pillows or hang over the sides. Pass the middle tie tape under the mattress and through the

middle loop on the opposite side (Fig.1). Pass end of tape under the corresponding bottom corner of the mattress (Fig. 2) up through the

center loop of product (Fig. 3) and down under opposite corner of mattress and then through side loop on opposite side of the product (Fig

4).

5. Repeat this process at the other end (Fig. 5).

DESCRIPTION OF THE DEVICE - electronic controller

1. Temperature controller 2. Power cord

3. Bed sheet / blanket / mat 4. Socket to disconnect the power cord before washing

5. Controller display 6. Switch “ON/OFF”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Camry CR 7436 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info