Bedienungsanleitung Camry CR 7732 (Seite 6 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

801628

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

convector in the event of excessive temperature convector (due to clogged vents, fan

malfunction ) . In this case, disconnect the unit from the power supply , waiting a few

minutes and remove the cause of overheating,

21. Do not touch the hot parts of the convector . Do not touch the appliance with wet hands.

22. In the case of wet convector or falling of any object through the ventilation grille of the

convector , turn it off immediately and disconnect from the network. Before re- use

with convector call for service .

23. Do not place the convector directly below the electrical outlet.

24. Always turn off the convector button before disconnecting it from the mains.

25. Do not use this heater in the immediate vicinity of a bathtub, shower or swimming pool

26. Do not use this heater if it has been dropped

27. Do not use if there are visible signs of damage to the heater

28. Use the heater on a level and stable surface or attach it to the wall, if provided for by the

manufacturer

WARNING: Do not use this heater in small rooms where there are people who are unable

to leave them by themselves, unless constant supervision is ensured.

WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at

least 1 m away from the heater air outlet.

"Caution Hot Surface" - The temperature of accessible surfaces may be higher when the equipment is in operation, which

means that the housing elements become hot during operation during operation, BE CAREFUL !!!

WARNING: In order to avoid overheating - do not cover the heater. The device is not to be covered with clothing, blankets

and other textile products which could cause ignition.

DEVICE DESCRPTION (Fig. 1)

1. Indication lamps 2. Control panel

3. Handle 4. Air outlet grid

5. Decorative ring 6. Feet

7. Power switch 8. Air inlet grid

Control Panel (Fig. 2)

9. Standby button 9A. Standby indicator 9B. Fan function (cold air) indicator

10. Temperature regulation button 10A. Desire temperature level indicators

11. Heating power regulation button 11A. Low heating power ~1100W indicator

11B. High heating power 1500W indicator

12. Timer button 12A. Desired heating period indicators

USAGE

1.Plug in the device to a 220-240V~50Hz socket.

2.To start the device, press the power switch (7) located at the back of device.

3.The standby indicator (9A.) on the control panel lights up.

4.Press the standby button (9) to activate the device.

5. The device will blow cold air from fan, the fan function indicator (9B.) will be lighted up.

6.Press the heating power regulation button (11) to choose suitable power level:

- to get low heating power ~1000W press once, at the same time the indicator (11A) will light up,

- to get high heating power 1500W press twice, so both indicators (11A + 11B) will be lighted up.

7.Press the timer button (12) to set the countdown time to turn off your heater automatically when the heater is on. You can set up the

heating time by repeated pressing the timer button (12), the desired heating period will be shown by indicators (12A). To switch off the

timer function press button (12) again. The maximum heating time is 7 hours.

8. The device is equipped in digital thermostat control. During operation, press the temperature regulation button (10) to set the desired

temperature (15°C / 20°C / 25°C / 30°C / 35°C) /15°C when the room temperature rises to the set temperature, the heater will stop

heating until the moment the temperature drops a few degrees. After choosing the desired temperature level one of indicators (10A) will

be lighted up.

Note: The temperature set using the temperature regulation button (10) button will not be reached if it is less than the current room

temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Camry CR 7732 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info