Bedienungsanleitung Camry CR 7853 (Seite 7 von 180) (Alle Sprachen)

797772

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

WARNING:

When operating the device in conditions of varying humidity, the down cooler drain hole (9) should be constantly open and ensure

constant water drainage. To comfortable draining the water use included plastic pipe.

COOL "K" mode:

1. When the room temperature is higher than set temperature on control panel, the compressor starts to run.

2. When the room temperature is lower than set temperature on control panel, the compressor stop and upper fan operates at

original set speed.

Fan "M." mode:

1. The upper centrifugal fan runs at set speed, and the compressor does not run.

2. The adjustment of temperature is no effective.

Heat “R” mode:

1.When the room temperature is higher than the set temperature, the device will stop heating function automatically.

2.When the room temperature is lower than set temperature, the device will start heating function automatically.

Timer operation "N":

1. Press “N” button to set Automatic Off time while the unit is running.

2. Press “N” button to set Automatic On time while the unit is ready status.

3. The time can be adjusted within a range of 1 hour to 24 hours by pressing the button "D" to increaseor "E" to decrease the period

of the device operation.

Sleep mode "I" operation

1. The sleep mode operations when the unit is under cooling "K" mode and heating “R” mode.

2. Press the button "I" in cool mode "K" , then the unit will work under sleep mode and the upper centrifugal fan will turn to low

speed automatically. The set temperature will increase by 1 ℃ after one hour, and increase 2℃ after two hours. After six hours the

unit will stop running.

3. Press the button "I" in heating mode "R" , then the device will work under sleep mode and the up centrifugal fan will turn to low

speed automatically. The set temperature will decrease by 1 ℃ after one hour, and decrease 2℃ after two hours. After six hours the

unit will stop running.

Swing "O" mode operation:

When the device is on, press button "O" , the vertical louver will on or off. When swing mode is on, the louver can swing up and

down within 60 degree. Press the button "O" again, the louver will stop swinging.

WI-FI function - Connection

Please note that the appearance of the screenshots shown on page 4 may be changed by "Tuya Smart" as a result of technological

development from the date of production of the product to the date of purchase of this device, however, the general principle of

connection is described below:

1. Download Application “Tuya Smart” on your smart phone.

2. Then “add device”. Look at print screen I.

3. Press icon of folder “Large home appliances”.

4. Press icon of folder “Portable Air Conditioners (WI-FI)”. Look at print screen II.

5. Choose “2,4G Hz Wi-Fi” (password field is blank, write your password) press “Next”. Look at print screen III.

6. At screen: “Reset the device at first” press “Confirm the indicator is blinking rapidly” and press “NEXT”. Look at print

screen IV.

Warning: If at your device the Wi-Fi indicator “T” is not blinking rapidly, please do set the device under stand-up and please do hold

the timer / temperature up button “D” for seconds, then WI-FI lamp will blink.

7. Now you see “Addling device” screen and progress of adding device process. It takes just few seconds.

8. When you see “Added successfully” press “Done”. Look at print screen V.

9. You see screen “Welcome Home”, then you should press icon switch off “OFF” to change into switch on “ON” to start

operation same way as it is described for operation via remote controller (4).

Notice:

The main control board has memory function, when the device is ready to run but in stop status, the main control board can

memorize the initialization of working mode. When you turn on the unit, it will work as the same enactment of working-mode as last

time, no need to reset the working mode again. (This condition is not available when the unit is under AUTO mode "J".)

REMOTE CONTROLLER

1. Slide the back cover to open and take off the isolating film on the batteries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Camry CR 7853 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info