Bedienungsanleitung Canadian Spa Company Yukon (Seite 15 von 32) (Englisch)

764875

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Owners Manual

Installation: Adding your spa cover

ATTACHING YOUR SPA COVER

The Spa Cover is an important accessory to help preserve the spa’s

temperature. The Spa Cover also serves as a safety device, preventing

unauthorised users from entering the spa. Proper installation of the Spa

Cover is an important addition in the spa installation.

1. Remove Spa Cover from packaging.

2. Place Spa Cover on spa in order to allow easy access to the

topside console when opening the cover.

3. Line up attaching straps and secure with mounting hardware.

4. Use locking mechanism to lock Spa Cover in place.

IMPORTANT:

• Always lock Spa Cover in place when not using the spa.

• Do not walk or sit on Spa Cover.

• Remove snow build-up to avoid breaking the foam inner core.

• Do not drag Spa Cover on rough surfaces.

Like any luxury item - a boat, car or recreational vehicle, care and

maintenance is critical to the lasting quality and enjoyment of a spa.

The spa has been designed to provide years of health and relaxation

beneﬁts. Proper care and maintenance outlined in this section is

necessary to ensure the longevity of the spa. Damage caused by

not following care and maintenance guidelines in this section is not

covered by the manufacturer’s warranty.

BOTTOM MOUNT” HOT TUB

COVER LIFTER.

Fully compatible with Canadian

Spas; this Cover Lifter is the

ideal choice to complement

your hot tub or spa, making

cover removal and replacement

a quick, one-handed operation

while reducing wear and tear on your hot tub cover.

• Mounts directly to the spa

• Can be mounted with optional under-spa brackets without the

need for drilling holes in the skirt.

• Made of black powder-coated Aluminum

• Requires 31cm - 46 cm rear clearance

TOP MOUNT”HOT TUB COVER LIFTER

Fully compatible with ALL our Canadian Spa hot tubs and spas and

most other brands; this Cover Lifter is the ideal choice to

complement your Hot Tub, making cover removal and replacement a

quick, one-handed operation and reducing wear and tear.

• Low-proﬁle design

• Virtually zero clearance

required behind spa – great for tight spaces (particularly if your

spa is located in a gazebo)

• Mounts directly to the spa

• Fits up to 2.4m Spas

• Made of Aluminium

CANADIAN SPA CABINET MOUNT LIFTER.

Fully compatible with Canadian Spa Company spas; this cover lifter

is the ideal choice to complement your hot tub or spa, making cover

removal and replacement a quick, one-handed operation while

reducing wear and tear on your hot tub cover.

• Mounts directly to the spa cabinet

• Made of black powder-coated Aluminum

• Fits up to 2.4m Spas (including swim spa)

• Requires 30.48cm - 45.72cm rear clearance

Whilst this is the most suitable product to complement our hot tub

range, this product will also ﬁt most regular shaped hot tubs and

spas up to 2.4m wide.

NOTE: This product requires some tools to assemble and ﬁt,

including: a spanner and a cordless drill.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canadian Spa Company Yukon Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canadian Spa Company Yukon

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info