Bedienungsanleitung Candy CDP 6350 (Seite 37 von 52) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

541698

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Changing a running programme

Proceed as follows to change or cancel a

running program:

■ Hold the "RESET" button down for at

least 5 seconds.

The programme indicator lights will turn

on and off individually and sequentially

and some audible signals will sound.

■ The running programme will be cancelled

and all the programme indicator lights will

flash.

■ At this point a new programme can be set.

WARNING!

Before starting a new programme,

you should check that there is still

detergent in the dispenser.

If necessary, top up the dispenser.

Programme operations

When a programme is running the relevant

indicator light will remain on and the 3

“PROGRAMME STATUS” indicator lights

("WASH" , "DRY" , and "END" )

will light singularly and in sequence to

indicate the current phase.

If there is any break in the power supply

while the dishwasher is operating, a

special memory stores the selected

programme and, when the power is

restored, it continues where it left off.

Programme end

A5 second alarm will sound (if not muted)

3 times at 30 second intervals to signal that

the programme has ended.

The programme end indicator light will turn

on, while all the others indicator lights will

turn off.

Dishes can now be removed and the

dishwasher turned off by pressing the

"ON/OFF"button or dishes can be loaded

for new cycle

"DELAYSTART" button

The dishwasher start time can be set with

this button, delaying the start by 3, 6 or 9

hours.

Proceed as follows to set a delayed start:

■ Press the "DELAY START" button (each

time the button is pressed the start

will be delayed by 3, 6 or 9 hours

respectively and the corresponding time

indicator light will illuminate).

■ To start the countdown, press the

"START" button (the selected programme

indicator light will come on, while the set

time indicator light will start to flash).

If a 9 hour delay is set, countdown will be

displayed by the 6h indicator light after 3

hours and the 3h indicator light after 6

hours.

At the end of the last 3 hours (at the end

of countdown) the 3h indicator light will

stop flashing and remain on to indicate the

washing phase and the programme will

start automatically.

If countdown has not ended, whereby

the programme has not yet started, it is

possible to change or cancel the delayed

start and select another programme or to

select/deselect the option button, proceeding

as follows:

■ Hold the "RESET" button down for at

least 5 seconds.

The programme indicator lights will turn

on and off individually and sequentially

and some audible signals will sound.

■ The delayed start and the selected

programme will be cancelled.

The programme indicator lights will flash.

■ Press the "DELAY START" button to

set another delayed start time (the

corresponding indicator light will turn on).

■ A new programme can be set after a

delayed time has been changed or

cancelled or an option button can be

selectedor deselected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Candy CDP 6350 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info