Bedienungsanleitung Candy CDPM 65750 X (Seite 14 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

541710

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

PROGRAMME SELECTION

AND SPECIAL FUNCTIONS

(Use in conjunction with programme guide)

"U WASH"button

This button allows you to modify the wash

intensity, according to how dirty your dishes

are, by modifying the wash time and

temperature.

Press the button to increase the intensity of

wash cycle ( indicator light) or to reduce

the intensity of wash, this also allows you to

decrease the wash length time ( indicator

light).

The combination of the button with the 4

main wash programmes enables to have 8

additional wash cycles (achieving a total of

12 programmes of washing).

IMPORTANT

When the dishwasher is switched on,

the setting last used will be indicated.

Programme settings

■ Open the door and place the dirty dishes

inside the appliance.

■ Press the "ON/OFF" button . The

display will show two lines.

■ Choose a programme by pressing the

"PROGRAMME SELECTION" button.

■ If you wish, press the "U WASH" button.

■ If you wish to select an option, press the

corresponding button (the indicator light

will turn on).

The option buttons can be selected or

deselected WHITIN one minute of the

programme commencing.

■ Press the "START" button.

The length of the program will be shown on

the display alternating hours with

minutes [I.e: 1 h (1 hour) / 25 (25 minutes)].

■ When the door is shut, after an audible

signal has sounded, the programme will

start automatically. The display will show

the time remaining to the end of the cycle.

WITHIN one minute of the programme

commencing, another programme

can be selected, simply by pressing

the "PROGRAMME SELECTION"

button (it is also possible to change

the "U WASH"button setting ).

"IMPULSE" programmes

The “IMPULSE” programmes use an

impluse washing technology, which reduces

consumption, noise and increases

performances.

IMPORTANT

The “intermittent” working of the

washing pump MUST NOT BE

considered a malfunction, it is a

characteristic of the impulse washing

so must be considered a normal

function of the programme.

Programme interruption

Opening the door when a programme is

running is not recommended especially during

the main wash and final hot rinse phases.

However, if the door is opened while a

programme is running (for example, to add

dishes) the machine stops automatically and

the display will flash the remaining time

before the end of the cycle. Close the door,

without pressing any buttons. The cycle will

start from where it left off.

IMPORTANT

A running program can be interrupted

without opening the door by

pressing the "ON/OFF" button. In

this case, simply press the "ON/OFF"

button again to restart the cycle from

where it left off.

WARNING!

If you open the door during the

drying cycle, an audible audio signal

advises you that the drying cycle has

not yet finished.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Candy CDPM 65750 X Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info