Bedienungsanleitung Candy CIO 225 NE (Seite 15 von 113) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

817926

Zoom out

Zoom in

Vorherige Seite

1/113

Nächste Seite

EN 13

Fig. 2

By ensuring that this product is properly disposed of, you will help

prevent potential negative consequences for the environment and

human health, which could otherwise arise due to inappropriate waste

handling of this product on reaching the end of its working life.

With proper disposal of the appliance, it is possible to recover valuable

raw materials!

This appliance is marked as conforming to the European Directive

2012/19/EU on Waste of Electrical and Electronic Equipment (WEEE).

The symbol on the product indicates that this appliance may not be

treated as normal household waste; it must, instead, be delivered over to

the nearest collection point for the recycling of electrical and electronic

equipment.

Disposal must be effectuated in accordance with the environmental

regulations in force for waste disposal.

For more detailed information about treatment, recovery and recycling of

this product, contact the competent public office (Department of Ecology

and Environment), your home household waste disposal service, or the

shop where you purchased the product.

Cut and dispose of the power cord with the plug.

Up until appropriate disposal, do not damage the tubing because they

contain the refrigerant gas.

For the disposal of packing materials, follow local regulations.

WEEE contains both polluting substances (which can cause negative

consequences for the environment) and basic components (which can

be re-used). It is important to have WEEE subjected to specific

treatments, in order to remove and dispose properly all pollutants, and

recover and recycle all materials.

Individuals can play an important role in ensuring that WEEE does not

become an environmental issue; it is essential to follow some basic

rules:

-WEEE should not be treated as household waste.

-WEEE should be handed over to the relevant collection points managed

by the municipality or by registered companies. In many countries, for

large WEEE, home collection could be present.

- when you buy a new appliance, the old one may be returned to the

retailer who has to collect it free of charge on a one-to-one basis, as long

as the equipment is of equivalent type and has the same functions as the

supplied equipment.

• The socket is earthed and in compliance with the law.

• The socket can withstand the maximum power load of the appliance, as

indicated on the nameplate of the refrigerator.

• The power supply voltage is within the amounts indicated on the

nameplate of the refrigerator.

• The cord must not be folded or compressed.

• The cord must be checked regularly and replaced solely by authorized

technicians.

• The manufacturer declines any liability whenever these safety

measures are not respected.

Remove all wrapping/packaging present inside the appliance and clean

with water and baking soda or neutral soap.

After the installation, wait 2 - 3 hours to allow time for the refrigerator/

freezer to stabilize at normal working temperature, before placing fresh

or frozen foods inside.

If the power cord becomes disconnected, wait at least five minutes

before restarting the refrigerator/ freezer. At this point, the appliance is

ready for use.

• The thermostat unit for control of the appliance is located inside of the

refrigerator compartment (Fig. 1).

Rotate the thermostat knob of the thermostat beyond the “0” position.

The light is on when the refrigerator door is open. Turning the knob to “0”

completely turns off the product.

• The temperature adjustment of both compartments is effected by

rotating the thermostat knob (Fig. 2).

Select the desired position:

• For colder temperature in the refrigerator and in the freezer, by turning

towards 5.

• For temperature less cold in the refrigerator and in the freezer, by

rotating in the direction of 0.

WARNINGS:

• Do not install the appliance in a damp or wet location as this could

compromise the insulation and result in leakage.

Furthermore, on the exterior of the same, condensate could accumulate

• Do not place the appliance in locations outside or near sources of heat

or exposed to direct sunlight.

The appliance operates properly within the range of environmental

temperatures indicated:

+10 +32’C for the climatic class SN

+16 +32’C for the climatic class N

+16 +38’C for the climatic class ST

+16 +43’C for the climatic class T

(See the nameplate of the product)

• Do not place containers with liquids on top of the appliance.

• Wait at least 3 hours after final placement before placing the appliance

in operation.

After shipping, place the appliance vertically and wait at least 2 - 3 hours

before connecting it to the electrical system. Before inserting the plug

into the electrical socket, make sure that:

This equipment, in the parts intended to come into contact with

food products, is in conformity with the requirements of EC

Regulation No. CE 1935/2004. Apparatus conforms with European

Directive 2004/1 08/EC, 2006/95EC and successive amendments.

Scrapping old appliance

Conformity

Appliance start-up

Turning On/Off (no display)

Temperature adjustment (no display)

OPERATION

Electrical connection

INSTALLATION

Fig.1

Position Conditions

1-2 Summer or ambient temperature between

25-35 °C

3-4 Spring, autumn or ambient temperature

between 15-25 °C

5 Winter, or ambient temperature between

5-15 °C

Candy CIO 225 NE Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info