Bedienungsanleitung Candy Evo W6853 (Seite 7 von 21) (Englisch)

513728

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

PROGRAMME selector with "OFF" position

When the programme selector is turned

the display lights up to show the settings

for the programme selected.

N.B. To switch the machine off, turn the

programme selector to the “OFF”

position.

Press the "Start/Pause" button to start the selected cycle.

Once a programme is selected the programme selector remains stationary on the selected

programme till cycle ends.

Switch off the washing machine by turning the selector to "OFF".

Note:

The programme selector must be returned to the "OFF" position

at the end of each cycle or when starting a subsequent wash

cycle prior to the next programme being selected and started.

Buttons indicator light

These light up when the relevant buttons are pressed.

If an option is selected that is not compatible with the selected programme then the light on

the button first flashes and then goes off.

“STAIN LEVEL” button

By selecting this button (active only on COTTON and MIXED FIBRES programmes) there is

a choice of 3 levels of wash intensity, depending on how much the fabrics are soiled.

Once the programme has been selected the indicator light will automatically show the stain

level set for that programme. Selecting a different stain level the relevant indicator will light

up. For example: Using this button on the Rapid Wash cycle will enable you to select either a

14, 30 or 44 minute wash cycle.

8) DRYING PROGRAMME INDICATORS

The indicators display the type of the drying programme:

The washer dryers incorporate an Automatic Sensor Drying function which takes the

guesswork out of setting the drying time. You simply select the degree of dryness you

require and the dryer automatically switches off when that level is reached. For added

flexibility there are 3 Sensor Drying levels to choose from:

= Extra dry programme

= Cupboard dry programme

= Iron dry programme

USEFULTIPS:

Once the programme option has been selected, press the Start Pause button. The appliance

will then calculate the time to the end of the selected programme based upon a full dry load.

During the cycle the appliance will update the time to suit the actual load size and dampness

of the fabrics.

imed programmes:

Alternatively you may select a pre-determined time for the drying cycle. The Timed Drying

programmes may be set to the following times:

120 minutes – 90 minutes – 60 minutes – 30 minutes:

Cool down phase

A10 minute cool down phase occurs at the end of each drying cycle to ensure clothes are

not too hot to touch when the cycle finishes.

Today, most detergents have been improved to wash

efficiently at lower temperatures, therefore we have set the

default temperature settings of each programme to a lower

level, saving electricity and reducing the carbon footprint of

your machine. You can select an high temperature by

pressing the temperature button.

Please refer to the programme guide for the maximum

temperature to which each programme can be set.

{

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Candy Evo W6853 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info