Bedienungsanleitung Candy FUHP 825 (Seite 25 von 123) (Deutsch, Englisch, Spanisch)

466062

Zoom out

Zoom in

Vorherige Seite

1/123

Nächste Seite

ENG

At the completion of the set duration, the timer will stop the oven and give an audible warning.

Also, the symbol (A) will begin to flash on the screen. After bringing the oven button and oven

thermostat button to 0 position, pressing any button of the timer will end the audible warning.

Also, the timer will be brought to manual use function.

Semi- Automatic Programming According to Cooking Period :

This function is used to cook in the desired time range.

The foods to be cooked are put into the oven. The oven is adjusted to

the desired cooking function. The oven thermostat is adjusted to the

desired degree depending on the dish to be cooked.

Keep pressing on the MODE button until you see "stop" on the

timer screen. When you see "stop" on the timer screen, the symbol (A)

will begin to flash. Adjust the cooking period for the food you wish to cook,

by using the (+) and (-) keys while the timer is in this position. Some time

after the adjustment operation is completed, the day’s time will appear on

the screen and the symbols (A) and will begin to continuously light on

the screen. While doing this, the oven will also start to operate.

Semi-Automatic Programming According to Finishing Time :

This function is used to cook according to the desired finishing time.

The food to be cooked is put into the oven. The oven is adjusted to the

desired cooking function. The oven thermostat is adjusted to the desired

degree depending on the dish to be cooked.

Keep pressing on the MODE button until you see "end" on the timer

screen. When you see "end" on the timer screen, the symbol (A) and the

day’s time will respectively begin to flash.

MODE

Figure 14

MODE

Figure 15

A cooking period between the time range of 0 and 10 hours can be set.

At the completion of the set duration, the timer will stop the oven and give an audible warning.

Also, the symbol (A) will begin to flash on the screen. After bringing the oven button and oven

thermostat button to 0 position, pressing any button of the timer will end the audible warning.

Also, the timer will be brought to manual use function.

Adjust the finishing time for the food you wish to cook, by using the (+) and (-) keys while the

timer is in this position. Some time after the adjustment operation is completed, the day’s time

will appear on the screen and the symbols (A) and will begin to continuously light on the

screen. While doing this, the oven will also start to operate.

You can set a time which can be up to 10 hours after the day’s time.

Audible Warning Time Adjustment is for warning purposes only. The oven will not

be activated at this function.

The audible warning time can be set to a time between the time range of 0 and 23.59.

When the time is up, the timer gives an audible warning and the symbol begins to flash

on the screen. Pressing any key will stop the audible warning and the symbol disappears

on the screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Candy FUHP 825 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info