17
1. Open the door and load the drum with
laundry. Ensure that garments do not hinder
closure of the door.
2. Gently close the door pushing it slowly until
you hear the door 'click' shut.
3. Turn the Programme Selector dial to select
the required drying programme (see
Programme Guide).
4. If drying synthetics, acrylics or delicate items,
press the Acrylics/Synthetics button to
reduce the heat level.
The light next to the push button will light
up when the machine is in low heat setting.
To deselect in the first few minutes of the
programme, press the Acrylics/Synthetics
button, after this time reset the machine to
change the setting.
5. Press the Start/Pause button. The dryer will
start automatically and the DRY indicator
will be continuously lit.
6. If the door is opened during the programme
to check the laundry, it is necessary to press
Start/Pause to recommence drying after the
door has been closed.
7. When the cycle is nearing completion the
machine will enter the cool down phase, the
clothes will be tumbled in cool air allowing
the load to cool down.
8. When the programme is complete the END
indicator will light.
9. Following the completion of the cycle the
drum will rotate intermittently to minimize
creasing. This will continue until the
machine is switched OFF or the door is
opened.
Operation
WARNING!
The drum, door
and load may be
very hot.
