624614
98
Zoom out
Zoom in
Vorherige Seite
1/106
Nächste Seite
96 97
PART II
CARE AND MAINTENANCE OF CARBON FIBER FORKS & STEM
WARNING
ALWAYS SEEK PROFESSIONAL SERVICE - Incorrectly installing, adjusting, servicing, or assembling the wrong
parts (handlebar stem, compression assembly, brake bolt, spacers and spacer positions) on your bicycle fork can
cause serious damage to it. Any failure in the fork, headset, handlebar stem, or compression assembly while
riding can cause you to have a serious accident. All adjustments, maintenance, and any changes must be made by
your Cannondale Dealer.
STOP RIDING A DAMAGED FORK & STEM IMMEDIATELY Your fork can be seriously damaged in any crash or
impact. Damage can be concealed and requires very carefully inspection by a professional bike mechanic. A
damaged fork and/or handlebar stem can fail without warning. Go to PART II, Section D. Inspect For Safety. Read
“Understanding Composites” for information on carbon fiber
REPLACE THE FORK WITH A NEW ONE IF THE DROPOUT TABS ARE MISSING OR DAMAGED. The dropout tabs
located at the bottom of the fork dropout act as a secondary wheel retention device and can reduce the risk of the
wheel disengaging from the fork if the quick release is not correctly adjusted and closed. It is possible for the tabs
to become worn out or damaged through repeated wheel installation and removal, car rack use, etc. Do not file,
disable or remove the secondary retention devices. If they are damaged or severely worn, replace the fork.
DO NOT MODIFY THE FORK IN ANY WAY. Do not drill holes or install mechanical clamps.
BRAKE NUT ENGAGEMENT The brake mount is the attachment point of the front brake. A correctly size brake
bolt (recessed allen nut) must be used to ensure adequate thread enagement ( a minimum of 5mm) with the
brake caliper mounting post. Ask your cannondale dealer to help you. obtain the correct brake nut.
DO NOT EXCEED THE MAXIMUM STACK HEIGHT (55mm) OR LOCATE SPACERS ON TOP OF THE STEM.
MAXIMUM STACK HEIGHT is a distance spacers may be stacked between the top of the head tube and the
bottom of the stem. Exceeding this distance with spacers or locating spacers on top of the handlebar stem can
place significant stress on the steerer tube. It could break.
All Cannondale carbon road forks with a carbon steerer tube must use the SI Compression Assembly - KP017/.
No star nuts, no other compression devices may be used, no exceptions. The SI compression assembly must be
assembled and installed inside the steerer tube according to the instructions. See page 95.
OLDER FORKS & STAR NUTS - Cannondale carbon forks (2001-2008) utilized the various star nut and top caps
systems. Systems in these forks should not be changed. Do not use the Si Compression Assembly in a fork
with a star nut.
Always tighten fasteners of the headset/stem system and brake with a torque wrench. Observe the
manufacturer’s torque limits and loctite (thread locking compound) recommendations for each component of the
fork, stem, brake and handlebar system. Ask your cannondale dealer to help you. Over-tightening may cause
damage and lead to fork or component failure.
For technical information and specifications, see http://www.cannondale.com
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IN AN ACCIDENT IF YOU IGNORE THESE
WARNINGS.
(continued on next page...)
APPENDIX D.
98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cannondale 2011 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cannondale 2011

Cannondale 2011 Bedienungsanleitung - Deutsch - 104 seiten

Cannondale 2011 Bedienungsanleitung - Holländisch - 104 seiten

Cannondale 2011 Bedienungsanleitung - Französisch - 104 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info