Bedienungsanleitung Cannondale 2016 (Seite 22 von 106) (Englisch)

624611

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

20 21

PART I

SECTION 4. TECH

It’s important to your safety, performance and

enjoyment to understand how things work on your

bicycle.

We urge you to ask your dealer how to do the things

described in this section before you attempt them

yourself, and that you have your dealer check your

work before you ride the bike.

If you have even the slightest doubt as to whether

you understand something in this section of the

Manual, talk to your dealer.

See also:

PART I “Coaster Brakes”

PART II, SECTION B., INTENDED USE

PART II, SECTION D., INSPECT FOR SAFETY

PART II, SECTION E., MAINTENANCE

4.A - Wheels

Bicycle wheels are designed to be removable for

easier transportation and for repair of a tire puncture.

In most cases, the wheel axles are inserted into slots,

called “dropouts” in the fork and frame, but some

suspension mountain bikes use what is called a

“through axle” wheel mounting system.

If you have a mountain bike equipped with through

axle front or rear wheels, make sure that your dealer

has given you the manufacturer’s instructions, and

follow those when installing or removing a through

axle wheel. If you don’t know what a through axle

is, ask your dealer.

If you do not have a bicycle with a through-axle

mounting system, it will have wheel secured in one

of the following three ways:

• A hollow axle with a shaft (“skewer”) running

through it which has an adjustable tension nut

on one end and an over-center cam on the other

(cam action system, ﬁg.8a & 8b).

• A hollow axle with a shaft (“skewer”) running

through it which has a nut on one end and a

ﬁtting for a hex key, lock lever or other tightening

device on the other (through bolt, ﬁg. 9)

• Hex nuts or hex key bolts which are threaded on

to or into the hub axle (bolt-on wheel, ﬁg. 10)

WARNING

RIDING WITH AN IMPROPERLY SECURED

WHEEL CAN ALLOW THE WHEEL TO WOBBLE

OR FALL OFF THE BICYCLE, OR SUDDENLY

STOP THE WHEEL, WHICH CAN CAUSE

SERIOUS INJURY OR DEATH. THEREFORE, IT IS

ESSENTIAL THAT YOU:

1. Ask your dealer to help you make sure you

know how to install and remove your wheels

safely.

2. Understand and apply the correct technique

for clamping your wheel in place.

3. Each time, before you ride the bike, check

that the wheel is securely clamped. The

clamping action of a correctly secured wheel

must emboss the surfaces of the dropouts.

Some bicycles are equipped with a quick release lever

and a disc brake. If the bicycle is ridden with the lever

incorrectly adjusted or open, and the lever contacts the

disc or wheel (next gure), the front wheel could stop

suddenly, causing the rider to fall. Always make sure

your wheels are correctly attached, and the attachment

mechanisms closed and locked, before riding the bicycle.

Quick Release

Lever

Brake Disc

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cannondale 2016 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info