English – 10
Li-ion battery PowerTube 400 PowerTube 500 PowerTube 625
Product code BBP287 horizontal
BBP288 vertical
BBP285 horizontal
BBP286 vertical
BBP295 horizontal
BBP296 vertical
Rated voltage V= 36 36 36
Nominal capacity Ah 11 13.4 16.7
Energy Wh 400 500 625
Operating temperature °F +23 to +104 +23 to +104 +23 to +104
Storage temperature °F +50 to +104 +50 to +104 +50 to +104
Permitted charging temperature
range
°F +32 to +104 +32 to +104 +32 to +104
Weight, approx. lb 6.4 6.4 7.7
Protection rating IP 54 IP 54 IP 54
This device is in compliance with Part15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device must not cause harmful interference, and
2. this device must accept any interference that is received, including interference that may cause undesired operation.
This device is in compliance with CAN ICES-3(B)/NM B-3(B).
Fitting
u
Ensure the battery is placed on clean surfaces
only. Avoid getting dirt, e.g. sand or soil, in the
charging socket and contacts in particular.
Testing the battery before using it for the
first time
Test the battery before charging it for the first time or
using it in your eBike.
To do this, press the on/off button (4) to switch the
battery on. If none of the LEDs on the battery charge
indicator (3) light up, the battery may be damaged.
If at least one (but not all) of the LEDs on the battery
charge indicator (3) lights up, the battery will need to
be fully charged before using it for the first time.
u
Do not charge or use batteries if they are dam-
aged. Contact an authorized bicycle dealer.
Charging the battery
u
A Bosch eBike battery must only be charged us-
ing an original Bosch eBike charger.
Note: The battery is supplied partially charged. To en-
sure full battery capacity, fully charge the battery in
the charger before using it for the first time.
To charge the battery, read and follow the instruc-
tions in the operating manual for the charger.
The battery can be charged at any state of charge. In-
terrupting the charging process does not damage the
battery.
The battery has a temperature monitoring function
which only allows it to be charged within a tempera-
ture range of 32°F to 104°F.
If the temperature of the
battery is outside this
charging range, three of
the LEDs on the battery
charge indicator (3) will
flash. Disconnect the bat-
tery from the charger and
let it acclimatize.
0 275 U07 XPX | (09.04.2020) Bosch eBike Systems
