Bedienungsanleitung Cannondale Easy Rider Recumbent (Seite 12 von 13) (Englisch)

779944

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

TRANSPORTATION

On a car: You may need to use a tandem type rack. One design you may wish

to consider is the “Topper” rack (www.Atoc.com). One of the Topper designs

allows one person loading of a longer, heavier bike with a pivoting system.

These systems fit Thule and Yakima roof racks. We strongly recommend that

you remove the seat assembly prior to transportation on top of a car. The seat

assembly will add considerable aerodynamic drag. This drag will increase fuel

consumption, wind noise and stress on your rack.

In a car: Consider

removing the seat

assembly. Loosen the

two quick releases and

slide the seat

assembly forward and

off the seat rails.

Removing this bulky

part will ease packing.

When you reinstall the

seat assembly on the

seat rails be sure that

radius on each plastic

slide lines up with the radius on each side of the seat rail. See Fig. 15. See

also SET UP AND ADJUSTMENT section above regarding seat adjustments.

REFERENCES

The standard for recumbent information, from eclectic to mainstream: RCN,

Recumbent Cyclist News, P.O. Box 2048, Port Townsend WA, 98368 or

www.recumbentcyclistnews.com

side. The advantage of this design is that the weight of the panniers is centered

with your own weight.

WARNING: Do not strap or lash anything directly to the extended top

tube/rear fender. This is a round, slick surface that is close to the wheel. It

is not a safe place to carry gear. Packages or cargo could fall into the rear

wheel and cause an accident, with risk of serious injury.

ACCESSORIES

Lighting: Must be added if you ever ride at dawn, dusk or night. See section 2

F of the Cannondale Owners Manual. Reflectors alone are not adequate for

night riding. Note that the seat back struts are a good place to add a flashing

rear strobe light designed to be mounted on a conventional seatpost.

Kickstand: Cannondale includes one. Don’t forget to put it up before riding.

Water bottles: The Easy Rider stem has standard bosses for two water bottle

cages on the stem extension tube. If more capacity is needed we suggest a

bladder system suspended from the seat back.

Fenders: Front: Look for 16” front fenders, Bike E fenders work fine. Rear: A

small “shorty” fender used on some mountain bikes fits the Easy Rider and is

available from Cannondale, part # KF032/. Want something larger? Look for 20”

fenders. The swing arm offers good clearance. As with many bikes, fitting

fenders will require adaptation and/or fabrication by a careful professional

mechanic who considers suspension travel, disc brake clearance and vibration.

Fairings: Can be added. At this writing Cannondale does not make them or sell

them. Seek professional installation.

Chain guard: The Easy Rider frame has fittings resembling water bottle bosses

for a chain guard. Cannondale has plans to have one made to fit the Easy

Rider in the future. Please contact your retailer regarding availability.

Indoor trainers: See your retailer and consider models designed to fit a

recumbent like the Bike E.

Seat Rail

Plastic Slides

22 23

Fig. 15Fig. 15 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cannondale Easy Rider Recumbent Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info