804898
172
Zoom out
Zoom in
Vorherige Seite
1/220
Nächste Seite
172
PART 3
STEP 6. Installing the Handlebar And Stem
138690 Rev2 (10/22)
Assembling Your Bike
Cannondale Bicycle Owner’s Manual
Stem to fork steering tube set up:
Be sure that any fork protection spacer has been removed from the dropouts, the bottom parts
of the fork.
Take the bike out of the carton and place the fork dropouts on the floor. Keep the fork aiming
forward. Pivot the stem so that it faces directly forward.
Find the stem clamping bolts on the back of the stem. These are the bolts that hold the stem/
handlebar assembly in place on the steering tube of the fork. Tighten these bolts using a torque
wrench to the torque value marked on the stem. If no torque marking is present, tighten to 7Nm.
Method B, Stem is attached to the handlebars:
Remove the plastic fork protector from the bottom of the fork.
Set the bike on the floor. The rear wheel is already installed. As you set the fork on the floor be
sure that the fork is aimed forward. This will make it possible for the bike to balance on the floor.
Confirm that the fork is oriented forward. One way to check this is that the brake caliper will be
on the left side of the bike.
Now that the weight of the bike is pushing down on the fork remove the top cap. This is done by
un-threading the top cap bolt with a 5 mm allen wrench. Once loose, remove the top cap and
bolt as an assembly and set it nearby.
172

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cannondale Moterra Neo 2021 - Shimano E7000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cannondale Moterra Neo 2021 - Shimano E7000

Cannondale Moterra Neo 2021 - Shimano E7000 Zusatzinformation - Deutsch - 24 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Bedienungsanleitung - Deutsch - 102 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Zusatzinformation - Deutsch - 30 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Zusatzinformation - Englisch - 24 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Zusatzinformation - Englisch - 30 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Zusatzinformation - Holländisch - 24 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Bedienungsanleitung - Holländisch - 102 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Zusatzinformation - Französisch - 24 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Bedienungsanleitung - Französisch - 102 seiten

Cannondale Moterra Neo 2021 - Shimano E7000 Zusatzinformation - Französisch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info