779949
15
Zoom out
Zoom in
Vorherige Seite
1/21
Nächste Seite
14
si compression assembly
The cylindrical shape of the TOP CAP ts snugly within the carbon steering tube inside diameter
(I.D.), supporting the steerer from the clamping force of the stem. It must t snugly inside the
I.D. of the steerer.
How to install the assembly
1. Assemble the fork, headset, spacers, and stem. Make sure that the stem bolts are loose.
2. Set up the compression assembly. “READY TO INSERT above. The length should be about
48mm as shown above. You can do this by unthreading the top cap from the expander and
then threading it back on about 6-7 turns. The expanding parts should not be expanded.
3. Insert the SI compression assembly into the fork steerer. It should slide in snugly; the TOP
CAP closely tting the steerer inside diameter.
4. Insert a 5mm Allen key through the access hole in the TOP CAP and into the EXPANDER BOLT.
Tighten the expander by turning clockwise to 6.8Nm, 5 ftLbs.
5. To set bearing preload, insert a 6mm allen key into the hex shape in the TOP CAP iteself.
Turn the entire TOP CAP clockwise to increase preload. Turn counter-clockwise to decrease
preload.
6. When the headset preload is correct, align handlebar and tighten the stem fork clamp bolts
to the torque specied for the stem. Consult the stem since torque values are often marked
on the stem, or consult the manufacturer’s instructions.
WARNINGS
USE ONLY ORIGINAL EQUIPMENT CANNONDALE SI COMPRESSION ASSEMBLY. Do not
replace it with a star nut or use any other compression or expanding wedge assembly.
DO NOT INSTALL HEADSET SPACERS ON TOP OF THE STEM. Installing spacers above the
stem will raise the TOP CAP inside the steerer removing necessary support for the steerer
tube wall. When stem bolts are tightened. the steerer tube can be damaged.
PLACE HEADSET SPACERS ONLY BETWEEN THE HEADTUBE AND THE BOTTOM OF THE
STEM.
YOU CAN BE SEVERELY INJURED, PARALYZED OR KILLED IF YOUR IGNORE THESE
WARNINGS.
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cannondale Slice Aero wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cannondale Slice Aero

Cannondale Slice Aero Zusatzinformation - Deutsch - 20 seiten

Cannondale Slice Aero Zusatzinformation - Holländisch - 20 seiten

Cannondale Slice Aero Zusatzinformation - Französisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info