779950
9
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
8
8
2
1
a
b
3
c
4
DI2 BATTERY INSTALLATION
1. Remove the BB components in order to install the seat post battery.
2. Attach the mounting plate (1) to the battery (2) with 3mm cable ties. Make sure the plate lip (b) tie heads (a) are positioned as shown.
3. Attach the battery wire, handlebar wire and the front and rear derailluer wires to the Di2 junction box (3). Insert the junction box and
wire leads into the downtube through the small window (c). Allow the battery wire to drop out through the bottom of the BB shell.
4. Attach the battery wire to the battery. Insert the battery up through the BB hole into the seat tube with the mount down. Apply a light
film of grease to the mounting bolt (4) threads and install the mounting bolts through the frame into the mounting plate inside the
seat tube. Tightened the bolts to secure the battery.
5. Insert the wires up into the frame openings so that the BB components can be installed without interference.
INSTALLATION DE LA BATTERIE DI2
1. Retirer les éléments du boitier de pédalier pour pouvoir installer la batterie interne
2. Attacher les plaques de montage (1) à la batterie (2) a l’aide de collier de 3mm. S’assurer que
l’épaulement de la plaque de montage et les têtes de colliers de serrage soient positionnes tels que
montrés sur le schéma.
3. Attacher le câble de la batterie, le câble provenant du cintre et le câble connecté au dérailleur arrière au
boitier de connexion Di2. Insérer le boitier de connexion et ses câbles dans le tube diagonal via le trou de
passage (c). Faire en sorte que le fil de la batterie ressorte au niveau de la boite de pédalier.
4. Attacher le fil de la batterie à la batterie. Insérer la batterie à travers le trou de la boite de pédalier
(plaque de montage vers la bas). Appliquer une légère couche de graisse sur les filets des vis de montage
(4) et mettre en place les vis dans la plaque de maintien de la batterie dans le tube de selle en passant a
travers les trous du cadre. Serrer les vis jusqu’au maintien de la batterie.
5. Placer les câbles dans les ouvertures du cadre de façon à ce que les éléments du boitier de pédalier et du
pédalier puissent être installes sans interférence
FR
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cannondale Slice Multisport wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cannondale Slice Multisport

Cannondale Slice Multisport Zusatzinformation - Deutsch - 15 seiten

Cannondale Slice Multisport Zusatzinformation - Englisch - 15 seiten

Cannondale Slice Multisport Zusatzinformation - Holländisch - 15 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info