Bedienungsanleitung Canon B95 (Seite 9 von 116) (Englisch)

16526

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be

connected to a telephone line. Excessive RENs on a telephone line may result in the devices not

ringing in response to an incoming call. In most but not all areas, the sum of RENs should not

exceed five (5.0). To be certain of the number of devices that may be connected to a line, as

determined by the total RENs, contact the local telephone company. The REN for this product is

part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented

by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

This equipment may not be used on coin service provided by the telephone company.

Connection to party lines is subjected to state tariffs.

In Case of Equipment Malfunction

Should any malfunction occur which cannot be corrected by the procedures described in this

guide, disconnect the equipment from the telephone line and unplug the power cord. The

telephone line should not be reconnected or the power cord plugged in until the problem is

completely resolved. Users should contact Canon Authorized Service Facilities for servicing of

equipment. Information regarding Authorized Service Facility locations can be obtained by

calling the Canon Customer Care Center. (1-800-828-4040)

Rights of the Telephone Company

Should the equipment cause harm to the telephone network, the telephone company may

temporarily disconnect service. The telephone company also retains the right to make changes

in facilities and services which may affect the operation of this equipment. When such changes

are necessary, the telephone company is required to give adequate prior notice to the user.

FCC Notice

FAXPHONE B95: Facsimile Transceiver, Model H12414

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon B95 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info