Part 3: Operating Instructions
3-11
7 Name of the Parts and Their Functions
The different parts of the printer and their functions are shown below.
BJC-4400
Paper Support
Cut Sheet Feeder
Holds a stack of approximately 100 cut
sheets (64g/cm) for automatic feeding.
Paper Guide
Aligns the cut sheets in the cut sheet feeder
according to the paper size. A maximum
paper width of 241 mm (9.64 in.) can be set.
Autofeeds banner paper and scanning
document.
Control Panel
Front Cover
Paper Output Tray
Manual Feeding Slot
AC Adapter
Parallel Interface Connector
2
See the next page.
Open to install or remove the cartridge, set
the paper thickness lever, or remove the jams
paper.
Pulls out to receive the printed sheets.
Use for feeding media
manually.
Installed on the rear of the
printer, the AC adapter
supplies power from the power
outlet to the printer.
Depending on the location of
purchase, the power cable is
permanently attached to the
AC adapter where as in some
areas the power cable is
detachable.
Connects the printer to the
parallel port on the computer.
Supports the stack of paper loaded in the
cut sheet feeder.
