Bedienungsanleitung Canon C2020i (Seite 59 von 76) (Englisch)

684394

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Using the System Options/MEAP Applications

Installing by Not

Connecting This Machine

to an Outside Network

This section describes how to install the

system options and MEAP applications without

connecting the machine to an outside network.

Obtaining the License Key/

License File

Obtain the license key or license file.

License key:

Obtain the license key when installing the system

options using the touch panel display.

License file:

Obtain the license file when installing the system

options/MEAP applications using the Remote UI.

Make sure that the license access number that is included with

the package is available.

If the license access number is not printed on the package of

the MEAP application you are using, the license file is issued

by the distributor of the MEAP application. You do not need to

obtain the license key/license file explained in this section. For

more information, see the manual for each MEAP application.

Check the management number you need to

obtain the license key or the license file.

To obtain the license key or the license file, the following

management number is required.

License Access Number: Check the license access number

certificate.

Device Serial Number: Check and note the serial number

which is displayed at the bottom left of the screen when

you press on the machine.

Access http://www.canon.com/lms/license/.

Follow the instructions on the screen and obtain

the license key/license file.

If the license key is obtained, see “Installing the System

Options Using the Touch Panel Display,” on p. 57.

If the license file is obtained, see “Installing the System Options

Using the Remote UI (Manual),” on p. 57 or “Installing the MEAP

Applications Using the Remote UI (Manual),” on p. 58.

Installing the System

Options Using the Touch

Panel Display

You can install the system options to the machine by

registering the license key using the touch panel display.

󱄌

•

To perform the procedures described in this section, you must

from the Touch Panel Display,” on p. 8.)

Press → [Management Settings] → [License/

Other] → [Register License].

Enter the license key using - (numeric keys).

Details of each item are shown below.

: Press to move the cursor.

[Backspace]: Press when you entered a wrong number. The

number in front of the cursor is deleted and you can reenter

the correct number.

If the message <The value for the license key is not correct.

Check the license key.> is displayed, press [OK] → enter the

correct license key.

If the message <The feature required for installation is not

present.> is displayed, you cannot register the license key.

Press [OK] → cancel the registration.

Press [Start] → [OK].

The registered functions can be used only after you restart the

machine.

Installing the System

Options Using the Remote UI

(Manual)

You can install the system options to the machine using the

Remote UI.

To perform the procedures described in this section, you must

Using the Remote UI,” on p. 8.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon C2020i Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon C2020i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info