Bedienungsanleitung Canon C2020L (Seite 150 von 160) (Englisch)

684395

150

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

149

Self-Diagnostic Display

This section describes the messages that appear on the touch panel display and the method for resolving them. Follow the message that appears to

perform the required operation.

A message appears in the following cases:

When scanning or printing could not be performed due to a mistaken operation

When a user decision or operation is required during the scanning or printing operation

When a user decision or operation is required while accessing a network

A list of messages, causes, and remedies is indicated below.

•

Message Cause Remedy

Prepare a new waste toner container

and open the waste toner cover

behind the left part of the device.

Printing cannot be performed because the

waste toner container is full.

Replace the waste toner container. (See p. 73)

Preparing for color printing. Please

wait.

The machine is performing automatic

adjustment.

Please wait. When the adjustment is complete, colour

printing will automatically resume.

Place the original on the platen glass. A mode requiring an original to be placed on

the platen glass is set. There is no original on

the platen glass.

Place the original on the platen glass.

Remove the original from the platen

glass.

An original remains on the platen glass. Remove the original remaining on the platen glass, and

place the original again.

Original scanning area (thin glass

strip) is dirty.

The original scanning area (thin glass strip) is

dirty due to foreign material.

Clean the original scanning area of the feeder. (See p. 75)

Return the originals to their correct

order, then press the [Start] key.

Scanning stopped because an unspecied

problem occurred in the feeder.

Return the originals to their correct order. Place the

originals back into the feeder’s original supply tray, and

press .

Return the originals to their correct

order, then press the [Start] key. (The

data size of the scanned original

exceeded the limit. Settings will be

automatically corrected and the

originals will be scanned again.)

Scanning was cancelled because the data

size of the scanned originals exceeded the

maximum size that the machine can handle.

Scan the originals again from the rst page. If you still

cannot scan the originals, you may be able to resolve

the problem by decreasing the sharpness or setting the

original type to the Text mode.

The most proper size A4

is not

available.

The optimal paper size selected with

automatic paper selection is not loaded.

If this message appears even though the displayed paper

size is loaded, set [Paper Drawer Auto Selection On/O]

for the desired paper drawer to ‘On’. (See e-Manual >

Settings/Registration.)

Load paper of the displayed size. If you press without

loading the paper, the paper loaded in the currently

selected paper drawer will be printed on.

Adjusting gradation. Wait a moment... The machine is performing automatic

adjustment.

Please wait. When the adjustment is complete, printing

will automatically resume.

Yellow toner is low. Replacement not

yet needed.

Toner of the displayed colour is running low.

Prepare a toner cartridge of the displayed colour. (See

p. 69)

Replace toner cartridge. (Magenta) Printing will soon not be possible because the

toner of the displayed colour is running out.

Replace the toner cartridge of the displayed colour. (See

p. 69)

Insert toner cartridge. (Cyan) The toner cartridge of the displayed colour is

not inserted correctly.

Insert the toner cartridge correctly.

(See p. 69)

For information on messages that are not included here, see e-Manual > Scan and Send, Sending/Receiving

a Fax, and Network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon C2020L Seite 150

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon C2020L

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info