Bedienungsanleitung Canon C2020L (Seite 15 von 192) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

684395

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

Power supply

Do not damage or modify the power cord. Also, do not place heavy objects on the power cord, or pull on or

excessively bend it, as this could cause electrical damage and result in a re or electrical shock.

Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt,

resulting in a re or electrical shock.

Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.

Do not connect the power cord to a multiplug power strip, as this may cause a re or electrical shock.

Do not bundle up or tie the power cord in a knot, as this may result in a re or electrical shock.

Insert the power plug completely into the power outlet, as failure to do so may result in a re or electrical

shock.

Do not use power cords other than the power cord provided, as this may result in a re or electrical shock.

As a general rule, do not use extension cords. Using an extension cord may result in a re or electrical shock.

Do not use power supplies with voltages other than those specied herein, as this may result in a re or

electrical shock.

Always grasp the power plug when disconnecting the power cord. Pulling on the power cord may expose

or snap the core wire, or otherwise damage the power cord. If the power cord is damaged, this could cause

current to leak, resulting in a re or electrical shock.

IMPORTANT

Leave sucient space around the power plug so that it can be unplugged easily. If objects are placed around the power

plug, you will be unable to unplug it in an emergency.

Handling

Do not attempt to disassemble or modify the machine. There are high-temperature and high-voltage

components inside the machine which may result in a re or electrical shock.

If the machine makes strange noises, or gives o smoke, heat, or strange smells, immediately turn OFF

the main power switch, and disconnect the power cord from the power outlet. Then, contact your local

authorized Canon dealer. Continued use of the machine in this condition may result in a re or electrical

shock.

Do not use highly ammable sprays near the machine. If gas from these sprays comes into contact with the

electrical components inside the machine, it may result in a re or electrical shock.

To avoid damage to the power cord and creating a re hazard, always turn OFF the main power switch, and

unplug the interface cable when moving the machine. Otherwise, the power cord or interface cable may be

damaged, resulting in a re or electrical shock.

Make sure that the power plug is rmly inserted into the power outlet if the machine was moved. Do not use

the machine while the connection is loose, as doing so may cause a re.

Do not drop paper clips, staples, or other metal objects inside the machine. Also, do not spill water, liquids,

or ammable substances (alcohol, benzene, paint thinner, etc.) inside the machine. If these items come into

contact with a high-voltage area inside the machine, it may result in a re or electrical shock. If these items

are dropped or spilled inside the machine, immediately turn OFF the main power switch, and disconnect the

power cord from the power outlet. Then, contact your local authorized Canon dealer.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon C2020L Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon C2020L

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info