Bedienungsanleitung Canon DC10 (Seite 123 von 144) (Englisch)

55722

123

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

123

Trouble?

Recording/Editing

The disc cannot be ejected. Turn off the camcorder, disconnect the compact power

adapter and remove the battery pack. Restore the power

supply and try again.

–

The camcorder has exceeded its operational temperature.

Disconnect the compact power adapter and remove the

battery pack and let the camcorder cool down before resuming

use.

The camcorder vibrates. Depending on the condition of the disc, the camcorder might

vibrate occasionally. This is not a malfunction.

–

The disc’s rotation can be

faintly heard.

The disc is activated from time to time. This is not a

malfunction.

–

Occasionally the operation

sound can be heard.

The disc is activated from time to time. This is not a

malfunction.

–

After using the camcorder for

a long time the lights up

in red.

This is not a malfunction. Turn the camcorder off and let it cool

for a while before resuming operation.

–

Problem Solution

“ ” flashes red on the screen. The camcorder malfunctions. Consult a Canon Service

Center.

–

Image will not appear on the

screen.

Set the camcorder to . 31

Open the lens cover.

“SET THE TIME ZONE,

DATE AND TIME” appears on

the screen.

Set the time zone, date and time. 26

Recharge the built-in lithium battery and set the time zone,

date and time.

133

Pressing the start/stop button

will not start recording.

Set the camcorder to . 31

Load a disc. 29

The disc is full (“ END” flashes on the screen). Delete some

recordings (DVD-RW in VR mode) to free some space or

replace the disc.

Disc is protected. Cancel the disc protection or replace the

disc.

The camcorder has exceeded its operational temperature.

Disconnect the compact power adapter and remove the

battery pack and let the camcorder cool down before resuming

use.

–

Even after stopping recording,

the disc access indicator does

not go off.

The scene or still image is being recorded on the disc. 31

The point where the start/stop

button was pressed does not

match the beginning/end of

the recording.

There is a slight interval between pressing the start/stop

button and the actual beginning/end of the recording on the

disc. This is not a malfunction.

–

The recording suddenly stops

shortly after starting

recording.

The disc is dirty. Clean the disc with a soft lens-cleaning cloth

or replace the disc.

–

The camcorder has exceeded its operational temperature.

Disconnect the compact power adapter and remove the

battery pack and let the camcorder cool down before resuming

use.

Camcorder will not focus. Autofocus does not work on that subject. Focus manually. 50

Adjust the viewfinder with the dioptric adjustment lever. 22

Lens is dirty. Clean the lens. 136

Problem Solution

DC 20_10_PAL-E.book Page 123 Friday, September 2, 2005 6:36 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon DC10 Seite 123

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info