Bedienungsanleitung Canon DC10 (Seite 133 von 144) (Englisch)

55722

133

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

133

Do’s & Don’ts

Memory Card

 We recommend saving backups of memory card images on your computer’s hard drive

or other external memory device. Image data may be corrupted or lost due to memory

card defects or exposure to static electricity. Canon Inc. makes no warranties for

corrupted or lost data.

 Do not turn off the camcorder, disconnect the power source or remove the memory

card while the card access indicator is flashing.

 Do not use memory cards in places subject to strong magnetic fields.

 Do not leave memory cards in places subject to high humidity and high temperature.

 Do not disassemble memory cards.

 Do not bend, drop, or subject memory cards to shocks and do not expose them to

water.

 Moving a memory card rapidly between hot and cold temperatures may cause

condensation to form on its external and internal surfaces. If condensation forms on the

card, put it aside until the droplets have evaporated completely.

 Do not touch or expose the terminals to dust or dirt.

 Check the direction before inserting the memory card. Forcing a memory card into the

slot if it is not correctly oriented may damage the memory card or t he camcorder.

 Do not remove the label from the memory card, or affix other labels on the memory

card.

Lithium Button Battery

 Do not pick up the battery using tweezers or other metal tools as this will cause a short

circuit.

 Wipe the battery with a clean dry cloth to ensure proper contact.

 Keep the battery out of the reach of children. If swallowed, seek medical assistance

immediately. The battery case may break and the battery fluids may cause internal

damage.

 Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion.

Built-in Rechargeable Lithium Battery

The camcorder has a built-in rechargeable lithium battery to keep the date/time and other

settings. The built-in lithium battery is recharged while you use the camcorder, however, it

discharges when the usage time is short, and will become totally discharged if you do not

use the camcorder for about 3 months. In such case, recharge the built-in lithium battery:

Connect the power adapter to the camcorder and leave it connected for 24 hours with the

power switch set to OFF.

WARNING!

• The battery used in this device may present a fire or chemical burn hazard if

mishandled. Do not recharge, disassemble, heat above 100 °C or incinerate the

battery.

• Replace the battery with a CR2025 made by Panasonic, Hitachi Maxell, Sony, Sanyo,

or with Duracell2025. Use of other batteries may present a risk of fire or explosion.

• The used battery should be returned to the supplier for safe disposal.

DC 20_10_PAL-E.book Page 133 Friday, September 2, 2005 6:36 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon DC10 Seite 133

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info