Bedienungsanleitung Canon DC100 (Seite 69 von 84) (Englisch)

8666

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Trouble?

Playing Back the Disc in an External DVD Device

External DVD device refers to DVD players, DVD recorders, computer’s DVD drives and

other digital devices.

List of Messages

Problem Solution

There is a brief stop between

scenes.

Depending on the DVD player, there might be a very short

stop between scenes during playback.

–

Disc is running, but image will

not appear on the TV screen.

TV/VIDEO selector on the TV is not set to VIDEO. Set the

selector to VIDEO.

You attempted to play back or dub an incompatible disc. Stop

playback/dubbing.

–

The disc cannot be

recognized by the device. Or,

even though the disc is read,

cannot play back the disc or

the picture is distorted.

The disc is dirty. Clean the disc with a soft lens-cleaning cloth. 72

The disc has not been finalized. 61

DVD-RW discs in VR mode can only be played back with VR

mode-compatible DVD players. Refer to the instruction

manual of your DVD device.

–

Cannot edit my recordings or

add recordings to the disc

with the DVD device.

It may not be possible to edit or add recordings with an

external DVD recorder on a disc recorded with this camcorder.

–

When writing on a disc in this

camcorder recordings

transferred from a computer,

an error message appears.

The camcorder has exceeded its operational temperature.

Disconnect the compact power adapter and remove the

battery pack and let the camcorder cool down before resuming

use.

–

Message Explanation

SET THE TIME ZONE,

DATE AND TIME

You have not set the time zone, date and time. This message

appears each time you turn the power on until you set the time

zone, date and time.

CHANGE THE BATTERY

PACK

Battery pack is exhausted. Replace or charge the battery pack. 17

TEMPERATURE TOO

HIGH CANNOT RECORD

The camcorder has exceeded its operational temperature.

Disconnect the compact power adapter and remove the battery

and let the camcorder cool down before resuming use.

–

TEMPERATURE TOO

HIGH CANNOT REMOVE

DISC

CANNOT RECORD

CHECK THE DISC

There is a problem with the disc. Replace the disc. 22

This message can also appear if condensation has formed. Wait

until the camcorder dries completely before resuming use.

The disc’s recording surface may be dirty or scratched. –

REACHED THE

MAXIMUM NUMBER OF

SCENES

The maximum number of scenes has been reached. Delete some

recordings (DVD-RW in VR mode) to free some space or replace

the disc.

CANNOT PLAY DISC The disc is dirty or you attempted to play back a disc type not

supported (not DVD-R/RW).

–

This message can also appear if condensation has formed. Wait

until the camcorder dries completely before resuming use.

CANNOT EDIT DISC There are no scenes to edit or the recording is damaged. –

This message can also appear if condensation has formed. Wait

until the camcorder dries completely before resuming use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon DC100 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon DC100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info