Bedienungsanleitung Canon Digital Photo Professional - versie 3.14

543066

120

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

120

Introduction

Contents at

a Glance

Basic

Operation

Advanced

Operation

Advanced

Image Editing

and Printing

Editing

JPEG/TIFF

Images

Index

Processing

Large Numbers

of Images

Reference

O Click several times when dust spots are not erased completely

Where unwanted dust spots are not erased even after performing

step 5 once, they may be erased completely when you click several

times.

O Mainly spots of dust can be erased with the repair function

Spots of dust can be erased with the repair function. You may be

unable to erase lines of dust. In this case, use the copy stamp

function (p.121).

O The dust-erased image can be reverted to its original condition

at any time

A dust-erased image is displayed or printed as a dust-erased image.

However, since the dust on the image is not actually erased, you can

always revert to the original image by clicking the [Undo] button in the

copy stamp window or performing the “Re-Editing an Image”

procedure (p.123).

O Check dust erasure in the copy stamp window

Check dust erasure in the copy stamp window. Images before dust

erasure are displayed in other windows and you will be unable to

check them.

O Printing dust-erased images

You can print as a dust-erased image by printing it in DPP.

O The image becomes a dust-erased image when saved as a

separate image

The dust-erased JPEG or TIFF image actually becomes a dust-

erased image when saved as a separate image (p.122).

Additional information

O Checking the dust erased spots

After step 5, you can display and check in detail the erased dust spots

one by one by pressing the <Shift> + <F> keys. (Press the <Shift> +

<B> keys to return to the previous dust spot.)

O Canceling a specified erased dust spot only

After step 5, you can press the <Shift> + <F> keys or the <Shift> +

<B> keys to display the erased dust spot, and then press the <Shift>

+ <Del> keys to cancel only the erased dust spot displayed.

O Switch between full screen display/normal screen display using

shortcut keys

You can also switch between full screen display/normal screen

display by pressing the <Alt> + <Enter> keys.

O Applying the dust erasure result to another image

You can apply dust erasure to the same place in another image by

clicking the [Copy] button to copy the dust erasure results and then

displaying the other image to which you want to apply the results and

clicking the [Paste] button.

To apply dust erasure to the same place in several other images, you

can efficiently erase dust spots by clicking the images while holding

down the <Ctrl> key in the main window, or, by selecting multiple

images by clicking the first image and then clicking the last image

while holding down the <Shift> key, and then displaying the copy

stamp window.

Useful functions of the copy stamp window

For a list of the copy stamp window functions, see p.143.

For images shot with ISO speed range expansion set, noticeable

noise may make it difficult to view dust spots in the copy stamp

window, so using this function is not recommended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Digital Photo Professional - versie 3.14 - Windows Seite 120

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Digital Photo Professional - versie 3.14 - Windows

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info