Bedienungsanleitung Canon Digital Photo Professional 4.4

630594

Zoom out

Zoom in

Vorherige Seite

1/137

Nächste Seite

Sorting

Images

Introduction

Contents

Downloading

Images

Viewing

Images

Printing

Images

Editing

Images

Reference/

Index

Processing

Large Numbers

of RAW Images

Remote

Shooting

Specifying

Preferences

You can apply the same corrections to several images by first selecting

multiple images in the main window, and then performing correction

procedures (p.71).

Also, you can apply same corrections by copying the recipe of the

corrected image and pasting it onto the multiple images (p.90).

O Some noise appeared in the periphery of an image after

correcting [Peripheral illumination]

You can reduce the noise by using luminance and/or chromatic noise

reduction of the noise reduction function (p.63). However, if you had

applied high amount of [Peripheral illumination] correction to the

images that have been shot at night or with a high ISO speed, the

noise might not be reduced.

O The image appears with less resolution after correcting

[Distortion]

You can make the image similar to the one before correction by

applying more sharpness with the sharpness adjusting function

(p.64).

O The colors of the image became weaker after correcting [Color

blur]

You can make the image similar to the one before correction by

adjusting the color tone (p.50) and/or the color saturation (p.62) to

make the color deeper.

O The result of [Color blur] correction cannot be detected

[Color blur] correction is effective for correcting blue or red color blur

which occurs at the edge of the highlighted area of an image. If

conditions do not match, correction cannot be made.

Additional information

Correcting Multiple Images at a Time

The periphery of the image may be truncated when [Distortion]

correction is made.

This function enables the resolution of images to be increased by

removing any remaining aberration related to image-forming capability

or any deterioration of resolution resulting from diffraction phenomena.

These optical phenomena cannot be corrected under Lens aberration

correction (p.68). Correction is achieved using the designed value of

each lens. The images that can be corrected are RAW images shot

using any of the following “Compatible Lenses”. JPEG, TIFF, S-RAW,

and M-RAW images cannot be corrected. To use this function, [Lens

data] for the lens used to shoot images first needs to be downloaded to

your computer. Before using the Digital Lens Optimizer, it is

recommended that you set [Sharpness] or [Strength] for [Unsharp mask]

for images to 0.

Wide angle lenses

EF14mm f/2.8L USM EF14mm f/2.8L II USM

EF20mm f/2.8 USM EF24mm f/1.4L II USM

EF24mm f/1.4L USM EF24mm f/2.8

EF24mm f/2.8 IS USM EF28mm f/1.8 USM

EF28mm f/2.8 EF28mm f/2.8 IS USM

EF35mm f/1.4L USM EF35mm f/1.4L II USM

EF35mm f/2 EF35mm f/2 IS USM

Standard and medium telephoto lenses

EF40mm f/2.8 STM EF50mm f/1.4 USM

EF50mm f/1.2L USM EF50mm f/1.8

EF50mm f/1.8 II EF50mm f/1.8 STM

EF85mm f/1.2L USM EF85mm f/1.2L II USM

EF85mm f/1.8 USM EF100mm f/2 USM

EF135mm f/2.8

(with Softfocus mechanism)

Digital Lens Optimizer

Compatible Lenses

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Digital Photo Professional 4.4 - Mac Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Digital Photo Professional 4.4 - Mac

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info