67
Setting Detailed Scan Conditions
3
Assign Single Function
Select the function to be assigned after you have selected the function key. For
details of these functions, refer to the separate DR-5060F Instruction “Function
Key Settings.” (P. 52)
[Manual Thickness Adjustment]
Assigns the manual paper thickness function (See P. 63) to the function key.
[Imprinter]
Enables the imprinter.
[Fixed Thickness Mode]
Fixes the thickness of the paper to be scanned to the setting made by manual
thickness adjustment.
[Double Feed Detection]
Automatically detects double feed. “Double feed” is detected when two or more
sheets of the document are fed together or when part of one sheet overlaps
another sheet.
[Display Odometer]
Displays the odometer of the currently attached camera unit.
[Display File Address]
Displays the file address of the currently attached camera unit.
[Display Page Address]
Displays the page address of the currently attached camera unit.
[Film Density]
Register the photographic density of the film within the range –3 to +3.
MEMO
If you change the film density setting and register the setting again to the same
function key with the function key assigned the film density in a lit state, the
function key goes out.
[Restore Settings]
Assigns the current scanner settings to a function keys. The function key
assigned the scanner settings lights, and goes out when the settings are
changed.
If you light the function key assigned the scanner settings before you open the
Scanner Settings dialog box, the assigned scanner settings are restored. Note,
however, that the [Mode] and [Resolution] settings are not restored, and must
be set separately.
[None]
Does not assign functions to function keys.
[OK] button
Enables the settings and closes the dialog box.
[Cancel] button
Cancels any settings you have set, and closes the dialog box.
Setting Scan Conditions
