Bedienungsanleitung Canon DR-M140 (Seite 16 von 83) (Englisch)

708908

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

Before Using the Scanner

Important Safety Instructions

To ensure the safe operation of this scanner, be sure to read the

safety warnings and precautions described below.

Installation Location

The performance of this scanner is affected by the environment in

which it is installed. Make sure that the location where the scanner is

installed meets the following environmental requirements.

● Provide adequate space around the scanner for operation,

maintenance, and ventilation.

● When scanning documents using the straight path, provide

adequate space in back of the scanner for scanned document

output.

● Avoid installing the machine in direct sunlight. If this is unavoidable,

use curtains to shade the scanner.

● Avoid locations where a considerable amount of dust accumulates

as dust may adversely affect the inside of the scanner.

● Avoid warm or humid locations, such as in the vicinity of a water

faucet, water heater, or humidifier. Avoid locations where ammonia

gas is emitted. Avoid locations near volatile or flammable materials,

such as alcohol or paint thinner.

● Avoid locations that are subject to vibration.

● Avoid exposing the scanner to rapid changes in temperature. If the

room in which the scanner is installed is cold but rapidly heated,

water droplets (condensation) may form inside the scanner. This

may result in a noticeable degradation in scanning quality. The

following conditions are recommended for optimal scanning quality:

Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)

Humidity: 20% to 80% RH

● Avoid installing the scanner near equipment that generates a

magnetic field (e.g. speakers, televisions, or radios.)

AC Adapter

● Connect only to a power outlet of the rated voltage and power

supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending

on your region).

● Do not connect other electrical equipment to the same power outlet

to which the scanner is connected. Also, when using an extension

cord, make sure that the extension cord is rated for the current

requirements of the scanner.

● Never try to take the AC adapter apart or modify it in any way, as

this is dangerous.

● The power cord may become damaged if it is often stepped on or if

heavy objects are placed on it.

● Do not use the power cord while it is coiled.

● Do not pull directly on the power cord. When disconnecting the

power cord, grasp the plug and remove it from the outlet.

● Keep the area around the power cord clear of objects so that the

power cord can be disconnected easily in an emergency.

● Do not use an AC adapter other than the one provided with the

scanner. Do not use the AC adapter provided with the scanner with

other products.

● If you have any questions regarding the power supply, contact your

local authorized Canon dealer or service representative for further

information.

100mm

(3.94")

100mm (3.94")

100mm

(3.94")

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon DR-M140 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon DR-M140

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info