Bedienungsanleitung Canon Drop-In Filter Mount Adapter EF-EOS R (Seite 1 von 2) (Englisch)

745173

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

ENG-1

Nomenclature

① Lens release lever

② Mount index (EF Lens)

③ Mount index (EF-S Lens)

④ Front mount

⑤ Front contacts

⑥ Mount index (camera side)

⑦ Rear mount

⑧ Rear contacts

⑨ Rubber ring

⑩ CLEAR filter

⑪ Variable ND filter

⑫ Circular polarizing filter

⑬ Lock release button

⑭ Adjustment dial

⑮ Solid white line

Thank you for purchasing a Canon product.

The Canon Drop-In Filter Mount Adapter EF-EOS R is designed to

allow EF series lenses *

to be used with EOS R series cameras.

It enables autofocusing, image stabilizers and other functions included

in the lens attached to the camera to be used *

*1 Does not include RF lenses, EF-M lenses, or CN-E lenses (EF Cinema

lenses).

*2 Certain restrictions may apply depending on the lens and camera in

use.

Caution

Details pertaining to risks that may result in injury.

●

Do not leave the product in places exposed to extremely high

or low temperatures. The product may cause burns or injury when

touched.

●

Do not insert your hand or ngers into the product. This may result

in injury.

Conventions used in this instruction

Warning to prevent lens or camera malfunction or damage.

Supplementary notes on using the adapter and taking pictures.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise

specified in the instructions. If such changes or modifications should be made, you

could be required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B) / NMB-3 (B)

When using a lens that is heavier than the camera, be sure to hold the lens.

When detaching the adapter, be sure to attach the front and rear cap to

protect the contacts. Make sure the adapter and cap mount indices are

aligned when attaching the caps.

Contacts that are scratched, soiled, or have fingerprints on them may result

in faulty connections or corrosion, which may lead to malfunctions. If the

contacts get soiled, clean them with a soft cloth.

Since a lens’ minimum focusing distance is lengthened when this adapter is

attached, maximum magnification and field of view might change.

The rear mount on the adapter has been fitted with a rubber ring to improve

dust-resistance and water-resistance performance. This rubber ring may

cause friction marks to appear around the camera’s lens mount, although

this will have no effect on usage.

Rubber rings can be replaced at Canon Service Center (chargeable).

■ Attaching and Detaching the Adapter

Attaching Procedures

1. Turn the camera OFF.

2. Attach the lens to the adapter.

Align the mount index found on the lens with the same mark found

on the adapter, and turn the lens clockwise until you hear a click.

(Fig. ❶-A for EF lenses, Fig. ❶-B for EF-S lenses)

3. Attach the adapter onto the camera while the lens is still

attached to it.

Align the mount index found on the adapter with the same mark

found on the camera, and turn the adapter clockwise until you hear a

click. (Fig. ❷)

Detaching Procedures

1. Turn the camera OFF.

2. Detach the adapter from the camera while the lens is still

attached to it.

Turn the adapter counterclockwise while pressing the camera’s lens

release button. Detach the adapter once it has stopped turning.

(Fig. ❸)

3. Detach the lens from the adapter.

Turn the lens counterclockwise while pushing the lens release lever

found on the adapter. Detach the lens once it has stopped turning.

(Fig. ❹)

CT1-B080-A

Drop-In Filter Mount Adapter

EF-EOS R

Instructions

ENG

①

③

②

⑥

⑧

⑤

⑨

④

⑦

❶-A ❶-B

❷

❸

❹

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Drop-In Filter Mount Adapter EF-EOS R Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon Drop-In Filter Mount Adapter EF-EOS R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info