Bedienungsanleitung Canon EF-M15-45 (Seite 1 von 2) (Englisch)

669781

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

ENG-1

❸

CT1-8606-002

❶

❷

❸

❹

Wide end

Telephoto end

Zoom ring

ENG

EF-M LENS Instructions

EF-M15-45mm f/3.5-6.3 IS STM

①

②

③

④

⑤

⑥

⑦

⑩

⑨

⑧

Nomenclature

① Focusing ring

② Hood mount

③ Filter mounting thread

④ Lens mount index

⑤ Contacts

⑥ Zoom position index

⑦ Lens retracted position index

⑧ Zoom ring

⑨

Focal length indicator

⑩

Lens-retraction switch

Thank you for purchasing a Canon product.

The Canon EF-M15-45mm f/3.5-6.3 IS STM is a standard

zoom lens developed for interchangeable-lens digital cameras

compatible with EF-M lenses*.

* The only digital interchangeable-lens cameras compatible

with EF-M lenses are EOS M series cameras. No other EOS

camera takes an EF-M lens.

•

"IS" stands for Image Stabilizer.

•

"STM" stands for stepping motor.

Safety Precautions

•

Do not look at the sun or a bright light source through the

lens. Doing so could result in vision loss or blindness.

•

Whether it is attached to the camera or not, do not leave

the lens under the sun without the lens cap attached. This

is to prevent the lens from concentrating the sun’s rays, which

could cause a fire.

Handling Cautions

•

If the lens is taken from a cold environment into a warm

one, condensation may develop on the lens surface and

internal parts. To prevent condensation in this case, first

put the lens into an airtight plastic bag before taking it from a

cold to warm environment. Then take out the lens after it has

warmed gradually. Do the same when taking the lens from a

warm environment into a cold one.

•

Do not leave the lens in excessive heat such as in a car in

direct sunlight. High temperatures can cause the lens to

malfunction.

•

Please also refer to the handling cautions found in your

camera’s instructions.

Usage Precautions

•

When using this lens, please check the Canon website for the

latest camera firmware. If the camera’s firmware is not the

latest version, be sure to update to the latest firmware.

•

For details on updating firmware, please check the Canon

website.

•

If you want to correct RAW images taken with this lens

mounted to an EOS M, EOS M2, or EOS M3 camera,

download the latest version of DPP (Digital Photo Professional)

from the Canon website and use the DPP software.

Conventions used in this instruction

Warning to prevent lens or camera malfunction or

damage.

Supplementary notes on using the lens and taking

pictures.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Do not make any changes or modifications to the equipment

unless otherwise specified in the instructions. If such changes

or modifications should be made, you could be required to stop

operation of the equipment.

This equipment has been tested and found to comply with the

limits for a class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for

help.

CAN ICES-3 (B) / NMB-3 (B)

1. Mounting and Detaching the Lens

See your camera’s instructions for details on mounting and

detaching the lens.

•

After detaching the lens, place the lens with the rear end

up to prevent the lens surface and contacts from getting

scratched. (fig.❶)

•

If the contacts get soiled, scratched, or have fingerprints on

them, corrosion or faulty connections can result. The camera

and lens may not operate properly.

•

If the contacts get soiled or have fingerprints on them, clean

them with a soft cloth.

•

If you remove the lens, cover it with the dust cap. To attach

it properly, align the lens mount index and the  index of the

dust cap as shown in the diagram, and turn clockwise. (fig.❷)

To remove it, reverse the order.

2. Shooting Preparations and Retracting Lens

Shooting Preparations:

With the lens retract position index and zoom position index

aligned, attach the lens to the camera. Turn the camera on.

A message prompting you to operate the lens appears on the

camera’s liquid crystal monitor. Maintain pressure on the lens-

retraction switch in the [▲] direction, and slightly rotate the

zoom ring in the direction of the white arrow to release the lens-

retraction switch. Further rotate the zoom ring until it clicks. The

message on the camera’s liquid crystal monitor disappears. The

lens is now ready for shooting. (The center of the no. 15 pointing

line in the focal length indicator will show above or to the left of

the zoom position index extension line.) (fig.

❸

)

Retracting Lens:

Maintain pressure on the lens-retraction switch in the [▲] direction.

Rotate the zoom ring in the opposite direction to the white arrow.

Align the lens retract position index and the zoom position index.

Release the lens-retraction switch to retract the lens.

Do not forcibly rotate the zoom ring if its movement becomes

constricted in the lens retract position or wide end (15 mm)

position. Doing so results in the risk of damaging the lens

retraction switch mechanism.

3. Zooming

Turn the lens’ zoom ring to adjust the size of the photo field or

subject. (fig.

❹

)

•

For wide shots, turn the zoom ring toward the wide end.

•

For close-ups, turn the zoom ring toward the telephoto end.

•

Be sure to finish zooming before focusing. Zooming after

focusing can affect the focus.

•

Blurring may temporarily occur if the zoom ring is quickly

rotated.

•

Zooming during still image exposure will result in delayed

focus. This causes any streaks of light that are captured

during exposure to be blurred.

Canon EF-M15-45 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EF-M15-45

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info