Bedienungsanleitung Canon EOS-1D X Mark III (Seite 21 von 961) (Englisch)

709237

Zoom out

Zoom in

Vorherige Seite

1/961

Nächste Seite

Handling Precautions

Camera care

This camera is a precision instrument. Do not drop it or subject it to physical shock.

The camera is not waterproof and cannot be used underwater.

To maximize the camera's dust- and drip- resistance, keep the terminal cover, battery

release handle, card slot cover, and all other covers firmly closed.

This camera is designed to be dust- and drip- resistant, in order to help prevent sand,

dust, dirt, or water that falls on it unexpectedly from getting inside, but it is impossible to

prevent dirt, dust, water, or salt from getting inside at all. As far as possible, do not allow

dirt, dust, water, or salt to get on the camera.

If water gets on the camera, wipe it off with a dry and clean cloth. If dirt, dust, or salt gets

on the camera, wipe it off with a clean, well-wrung wet cloth.

Using the camera in dusty or dirty locations may lead to damage.

Cleaning the camera after use is recommended. Allowing dirt, dust, water, or salt to

remain on the camera may cause a malfunction.

If you accidentally drop the camera into water or are concerned that moisture (water),

dirt, dust, or salt may have gotten inside it, promptly consult the nearest Canon Service

Center.

Never leave the camera near anything having a strong magnetic field such as a magnet

or electric motor. Also, avoid using or leaving the camera near anything emitting strong

radio waves, such as a large antenna. Strong magnetic fields can cause camera

malfunction or destroy image data.

Do not leave the camera in excessive heat, such as in a car in direct sunlight. High

temperatures can cause the camera to malfunction.

The camera contains precision electronic circuitry. Never attempt to disassemble the

camera yourself.

Do not block the mirror operation with your finger, etc. Doing so may cause a

malfunction.

Use only a commercially available blower to blow away dust when it adheres to the lens,

viewfinder, mirror, focusing screen, etc. Do not use cleaners that contain organic

solvents to clean the camera body or lens. For stubborn dirt, take the camera to the

nearest Canon Service Center.

Do not touch the camera's electrical contacts with your fingers. This is to prevent the

contacts from corroding. Corroded contacts can cause camera malfunction.

If the camera is suddenly brought in from the cold into a warm room, condensation may

form on the camera and internal parts. To prevent condensation, first put the camera in

a sealed plastic bag and let it adjust to the warmer temperature before taking it out of

the bag.

If condensation forms on the camera, to avoid damage, do not use the camera or

remove the lens, card, or battery. Turn the camera off and wait until the moisture has

fully evaporated before resuming use. Even after the camera is completely dry, if it is still

internally cold, do not remove the lens, card, or battery until the camera has adjusted to

the ambient temperature.

If the camera will not be used for an extended period, remove the battery and store the

camera in a cool, dry, well-ventilated location. Even while the camera is in storage,

press the shutter button a few times once in a while to check that the camera is still

working.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS-1D X Mark III Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS-1D X Mark III

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info