Bedienungsanleitung Canon EOS-1DS (Seite 10 von 176) (Englisch)

458349

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

Handling Cautions

Camera Care

(1) The camera is a precision instrument. Do not drop it or subject it to physical shock.

(2) This camera is not waterproof and cannot be used underwater. If you drop the camera

into water, promptly consult your nearest Canon Service Center. Wipe off any water

droplets with a dry cloth. If the camera has been exposed to salty air, wipe with a well-

wrung damp cloth.

(3) Never leave the camera near anything having a strong magnetic field such as a magnet

or electric motor. Also avoid using or leaving the camera near anything emitting strong

radio waves such as a large antenna. Strong magnetic fields and radio waves can cause

camera misoperation or destroy image data.

(4) Do not leave the camera in places of excessive heat such as in a car on a sunny day. The

heat can cause the camera to malfunction.

(5) The camera contains precision electronic circuitry. Never attempt to disassemble the

camera.

(6) Use only a blower brush to blow away dust on the lens, viewfinder eyepiece, mirror,

focusing screen, etc. Do not use any organic solvents to clean the camera body or lens.

For stubborn dirt, consult your nearest Canon Service Center.

(7) Do not touch the electrical contacts with your fingers.

Corrosion may develop on the contacts, resulting in improper camera operation.

(8) If the camera is suddenly brought into a warm environment from a cold one, condensation

(water droplets) may form on the camera and internal parts. To avoid this, first put the

camera in a vinyl bag and let it adjust gradually to the warmer temperature.

(9) If condensation develops on the camera, do not use the camera. Remove the CF card

and battery and wait until the condensation evaporates.

(10) If the camera is not to be used for an extended period, remove the battery. Store the

camera in a well-ventilated, cool, dry place. During the storage period, release the shutter

a few times once in a while.

(11) Avoid storing the camera in a laboratory, cabinet, etc., where corrosive chemicals are

present.

(12) If the camera has not been used for an extended period or if the camera is to be used for

an important event, check the operation of all the camera controls or take it to your

nearest Canon Service Center.

LCD Monitor and LCD Panels

(1) The color LCD monitor is manufactured with very high precision technology. There may

be a few dead pixels where a black, red, or green pixel is always displayed. They number

no more than 0.02 percent (standard tolerance) of all effective pixels. They also do not

affect the images recorded.

(2) Do not press hard against the LCD monitor or LCD panel or subject it to physical shock.

Doing so may result in a warped display or malfunction.

(3) If the LCD monitor or LCD panels become dirty, use a blower brush or soft cloth to clean.

For stubborn dirt, take the camera to a Canon Service Center.

(4) At low temperatures, the liquid-crystal display response may become slower. And at high

temperatures, the display may blacken. In either case, the display will return to normal at

room temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS-1DS Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info