Bedienungsanleitung Canon EOS 1Ds (Seite 8 von 176) (Englisch)

46684

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

• Do not handle the power cord if your hands are wet. Handling it with wet hands may lead

to electrical shock. When unplugging the cord, ensure that you hold the rigid portion of

the plug. Pulling the cord may damage or expose the wire and short-circuit, fires or

electrical shocks.

• Use of power sources not expressly recommended for this equipment may lead to

overheating, distortion of the equipment, fire, electrical shock or other hazards. Use only

the recommended power accessories.

• Use of batteries not expressly recommended for this equipment may cause explosions or

leaks, resulting in fire, injury and damage to the surroundings. Use only recommended

batteries and accessories.

• Use only Ni-MH Charger NC-E2 to charge the NP-E3. Use of chargers not expressly

recommended may result in overheating, distortion, fire or electrical shock.

• Do not place the batteries near heat or in water. Such exposure may damage the

batteries and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or

serious injury.

• Do not attempt to disassemble, alter, or apply heat to the batteries. There is serious risk

of injury due to an explosion. Immediately flush with water any area of the body, including

the eyes and mouth, or clothing, that comes into contact with the inner contents of a

battery. If the eyes or mouth contact these substances, immediately flush with water and

seek medical assistance.

• Avoid dropping or subjecting the batteries to severe impacts that could damage the

casings. This could lead to leakage and injury.

• Do not short-circuit the battery terminals with metal, such as key holders. This could lead

to overheating, burns and other injuries. Use the supplied protective cover to transport or

store the battery.

• Before you discard a battery, cover the terminals with tape or other insulators to prevent

direct contact with other objects. Contact with the metallic components of other materials

in waste containers may lead to fire or explosions. Discard batteries in specialized waste

facilities if available in your area.

• Disconnect Ni-MH Charger NC-E2 from electrical outlet after recharging and when the

camera is not in use to avoid fires and other hazards.

• The camera terminal of the DC Coupler Kit DCK-E1 is designed for exclusive use with the

EOS-1Ds. Do not use it with other products or batteries. There is a risk of fire and other

hazards.

IMPORTANT

• Do not remove the CF card from the camera while the CF card access lamp is blinking. A

blinking access lamp indicates that data on the CF card is being written or read. Remov-

ing the card at such a time will destroy the data.

• When connecting the camera to a personal computer, do not use any interface cable

other than the one provided with the camera. Using the wrong cable may result in

malfunction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS 1Ds Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS 1Ds

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info