Bedienungsanleitung Canon EOS 850D (Seite 22 von 775) (Englisch)

745183

Zoom out

Zoom in

Vorherige Seite

1/775

Nächste Seite

Handling Precautions

Camera care

This camera is a precision instrument. Do not drop it or subject it to physical shock.

The camera is not waterproof and cannot be used underwater. If the camera gets wet,

contact a Canon Service Center immediately. Wipe off any water droplets with a dry and

clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung

wet cloth.

Never leave the camera near anything having a strong magnetic field such as a magnet

or electric motor. Also, avoid using or leaving the camera near anything emitting strong

radio waves, such as a large antenna. Strong magnetic fields can cause camera

malfunction or destroy image data.

Do not leave the camera in excessive heat, such as in a car in direct sunlight. High

temperatures can cause the camera to malfunction.

The camera contains precision electronic circuitry. Never attempt to disassemble the

camera yourself.

Do not block the mirror operation with your finger, etc. Doing so may cause a

malfunction.

Use only a commercially available blower to blow away dust when it adheres to the lens,

viewfinder, mirror, focusing screen, etc. Do not use cleaners that contain organic

solvents to clean the camera body or lens. For stubborn dirt, take the camera to the

nearest Canon Service Center.

Do not touch the camera's electrical contacts with your fingers. This is to prevent the

contacts from corroding. Corroded contacts can cause camera malfunction.

If the camera is suddenly brought in from the cold into a warm room, condensation may

form on the camera and internal parts. To prevent condensation, first put the camera in

a sealed plastic bag and let it adjust to the warmer temperature before taking it out of

the bag.

If condensation forms on the camera, do not use the camera. This is to avoid damaging

the camera. If there is condensation, remove the lens, card and battery from the

camera, and wait until condensation has evaporated before using the camera.

If the camera will not be used for an extended period, remove the battery and store the

camera in a cool, dry, well-ventilated location. Even while the camera is in storage,

press the shutter button a few times once in a while to check that the camera is still

working.

Avoid storing the camera where there are chemicals that result in rust and corrosion

such as in a chemical lab.

If the camera has not been used for an extended period, test all its functions before

using it. If you have not used the camera for some time or if there is an important shoot

such as a foreign trip coming up, have the camera checked by your nearest Canon

Service Center or check the camera yourself and make sure it is working properly.

The camera may become hot after repeated continuous shooting, Live View shooting, or

movie shooting over an extended period. This is not a malfunction.

If there is a bright light source inside or outside the image area, ghosting may occur.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS 850D Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS 850D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info