Bedienungsanleitung Canon EOS C200 (Seite 162 von 236) (Englisch)

683261

162

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

Connecting to a Wi-Fi Network

162

Connecting to a Wi-Fi Network

The camera is Wi-Fi certified and can connect to a Wi-Fi network using an external access point

(wireless router) or can itself serve as a Wi-Fi access point. The camera can connect to wireless

routers (access points) and network devices compliant with the 802.11a/b/g/n protocol and that

are Wi-Fi certified (bear the logo shown on the right).

Note that using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties.

Be aware of the risks involved.

You can connect the camera to the network in Infrastructure mode, using an access point (wireless router etc.),

or in Camera Access Point mode, directly to a network device. The type of connection you can use, depends on

the network function you wish to use (A 161).

For an Infrastructure connection, the camera offers 4 ways to configure an access point and the method you use

will depend on the type and specifications of the access point and network you plan to use.

Camera Access Point: When shooting in a location where there are no access points available, the camera can

serve as a wireless access point*. Wi-Fi enabled devices will be able to connect to the camera directly.

* Limited only to the connection between the camera and supported Wi-Fi enabled devices. The functionality is not the same as

that of commercially available access points.

Infrastructure connection:

WPS (button): If your wireless router supports Wi-Fi Protected Setup (WPS), setup will be

easy and require minimal configuring and no passwords. To check if your wireless router

has a WPS button and for details about how to activate the Wi-Fi protected setup, refer to

the instruction manual of your wireless router.

WPS (PIN code): Even if your wireless router does not have a dedicated WPS button, it may support WPS using

a PIN code instead. For setup using a PIN code, you will need to know in advance how to activate the wireless

router’s WPS function. For details refer to the instruction manual of your wireless router.

Searching for Access Points: If your access point does not support the WPS function or you cannot activate it,

you can have the camera search for access points in the area.

Manual Setup: If the access point you want to use has stealth mode activated and it cannot be automatically

detected by the camera, you can enter all the necessary settings manually. This requires more advanced

knowledge of Wi-Fi and network settings.

IMPORTANT

• Depending on the country/region of use, some restrictions on outdoor use or camera access point

connections may apply when operating the IEEE802.11a/n wireless standard in the 5 GHz band. For details

see REGIONS OF USE in the supplied Basic Guide.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C200 Seite 162

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info