Bedienungsanleitung Canon EOS C200B (Seite 39 von 236) (Englisch)

683262

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

Preparing the Camera

In-Camera Lens Correction

Depending on the characteristics of the lens used, the corners of an image frame may be darker than the center

due to light fall-off (peripheral illumination drop), or color shift/color fringing may be visible along high-contrast

edges in the image (chromatic aberration). If the camera has correction data available for the EF lens used, it can

apply this correction data to compensate as necessary.

1 Attach the lens you want to use.

2 Open the desired correction screen.

> [

& Camera Setup] > [Periph. Illum. Corr.] or [Chromatic Aberr. Corr.]

• If correction data is not available, the corresponding menu option will appear grayed out. Visit your local

Canon website and check if there is correction data available for the lens you are using. If so, download the

necessary update package and upgrade the camera’s firmware following the instructions supplied therein.

3 Select [On] and then press the joystick

•As long as > [

& Camera Setup] > [Periph. Illum. Corr.] or [Chromatic Aberr. Corr.] is set to

[On], the camera will automatically apply the appropriate correction data.

Correction for EF-S Lenses

The peripheral illumination fall-off may be more pronounced with EF-S lenses than with EF lenses. To prevent

this, when you use an EF-S lens, you can change the image area that is used for producing the image.

1 Open the [EF-S Lens] submenu.

> [~

Camera Setup] > [EF-S Lens]

2 Select [On] and then press the joystick.

• will appear at the lower center of the screen.

• When [EF-S Lens] is set to [On], the image is enlarged digitally by a factor of approximately 1.04x, slightly

affecting the image quality. In most cases, using the default [Off] setting is recommended.

NOTES

• About in-camera lens correction data: The camera contains a register of correction data for compatible lenses

that were available at the time the camera went on sale. Correction data for future lenses will be made

available as part of the regular updates released for the camera’s firmware. For more details, visit your local

Canon website.

• No peripheral illumination/chromatic aberration correction will be applied in the following cases:

- When the appropriate correction data is not available for the lens attached.

- When using non-Canon lenses. Even if the corresponding menu setting is available (not grayed out), setting

it to [Off] is recommended.

• When peripheral illumination correction is activated:

- Depending on the recording conditions, noise may appear in the periphery of the image as a result of the

correction.

- The level of correction will be lower for lenses that cannot provide distance information.

- The level of correction will be lower the higher the ISO speed/gain setting used.

- When using EF-S lenses, peripheral illumination fall-off may be more pronounced.

Operating modes:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C200B Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C200B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info