Bedienungsanleitung Canon EOS C200B (Seite 102 von 236) (Englisch)

683262

102

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

Recording Audio

102

Audio Level Adjustment for CH3 or CH4

To adjust audio levels for CH3 and CH4, set the recording format to RAW or XF-AVC, or set it to MP4 and then

set > [

" Recording/Media Setup] >

[Audio Format (MP4)] to [LPCM 16 bit 4CH] in advance.

1 Open the [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/CH4] submenu.

> [

" Audio Setup] > [Audio Rec Level CH3], [Audio Rec Level CH4] or [Audio Rec Level CH3/

CH4]

2 Select [Automatic] or [Manual] and then press the joystick.

• If you selected [Automatic], the rest of the procedure is not necessary. If you selected [Manual], continue the

procedure to set the audio recording level.

3 Open the [CH3 Level], [CH4 Level] or [CH3/CH4 Level] submenu.

> [

" Audio Setup] > [CH3 Level], [CH4 Level] or [CH3/CH4 Level]

4 Push the joystick up/down to set the audio recording level and then press the joystick.

• For reference, 0 corresponds to –∞, 50 corresponds to 0 dB, and 100 corresponds to +18 dB.

• As a guideline, adjust the audio recording level so that the audio level meter on the screen will go to the right

of the –18 dB mark (one mark right of the –20 dB mark) only occasionally.

NOTES

• If at least one of the channels is set to the INPUT terminals, an analog audio source and manual audio level

adjustment, you can activate the audio limiter to prevent audio distortions. When activated, the audio limiter

will limit the amplitude of audio input signals when they start to distort. Use the > [

# Audio

Setup] > [INPUT 1&2 Limiter] setting.

• We recommend using headphones when adjusting the audio level. If the input level is too high, audio may

become distorted even if the audio level indicator shows an appropriate level.

• If you set an assignable button to [Audio Level Indicator] (A 125), you can press the button to turn the

onscreen audio level indicator on and off.

• The audio recording level of the monaural microphone is set to automatic and cannot be changed.

Advanced Audio Input Settings

Adjusting the Microphone’s Sensitivity (INPUT Terminals)

When the ANALOG switch for INPUT 1 or INPUT 2 is set to MIC or MIC+48V and the INPUT switch of the

terminal is set to ANALOG, you can select the external microphone’s sensitivity.

1 Open the desired INPUT terminal’s sensitivity submenu.

> [

# Audio Setup] > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming]

Linking the audio level adjustment of CH1/CH2 or CH3/CH4

• When both CH1 and CH2, or CH3 and CH4, are set to the INPUT terminals or MIC terminal and to the

same type of analog audio source (external line input or external microphone), you can use the >

[

! Audio Setup] > [CH1/CH2 ALC Link] or [CH3/CH4 ALC Link] setting to link the audio level

adjustment of both channels.

• When CH1 and CH2 are linked, you can use the CH1 audio level switch and audio level dial to affect both

CH1 and CH2. When CH3 and CH4 are linked, you can use the [Audio Rec Level CH3/CH4] and [CH3/CH4

Level] settings to affect both CH3 and CH4.

Operating modes:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C200B Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C200B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info