Bedienungsanleitung Canon EOS C200B (Seite 109 von 236) (Englisch)

683262

109

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

109

Using Metadata

The camera automatically adds metadata to XF-AVC clips while they are being recorded. You can use Canon XF

Utility to check and search for specific metadata. You can also create and transfer a user memo remotely using

Browser Remote on a connected Wi-Fi device (A 170).

Metadata components

User memo files need to be created using the software and saved on an SD card in advance.

Only when an optional GP-E2 GPS Receiver is attached to the camera. While recording, GPS information is recorded

automatically by the camera (A 111).

GPS information can only be added to clips already recorded.

Recording data is logged automatically by the camera.

Setting a User Memo Created with Canon XF Utility

Before you can add a user memo, you must first install Canon XF Utility (A 158). Next, create the user memo

and then save it to an SD card. Once you insert the SD card in the camera and select the user memo, it will be

added to clips you record.

1 Use Canon XF Utility to save a user memo to an SD card.

• For details, refer to

Managing User Memo Profiles

in the Canon XF Utility Instruction Manual.

2 Insert the SD card into SD card slot B.

3 Open the metadata [Setting] submenu.

> [

$ Recording/Media Setup] > [Metadata] > [Setting]

4 Select [SD Card] and then press the joystick.

5 Open the [User Memo] submenu.

> [

$ Recording/Media Setup] > [Metadata] > [User Memo]

6 Select the file name of the desired user memo and then press the joystick.

•The Q icon appears on the left of the screen.

• Select [Off] to record clips without a user memo.

NOTES

• After you set a user memo, do not remove the SD card while you are recording. If the SD card is removed, the

user memo will not be added to the clip.

• You must set the user memo before you start recording for it to be added to the clip. You cannot change the user

memo already added to a clip using the camera but you can do so with Canon XF Utility.

• When the optional GP-E2 GPS Receiver is attached to the camera and the GPS function is activated, the user

memo information will not be recorded, even if you have selected a user memo file from the SD card.

Metadata

Entering content Checking content

Camera Canon XF Utility Browser Remote Canon XF Utility

User Memo: clip title, creator, location and description. –

Ü Ü

GPS information: altitude, latitude and longitude. Ü

Ü Ü

Information about the recording: scene and take. Ü

–

– Ü

Information about camera settings: shutter speed, ISO

speed/gain value, etc.

–

– Ü

Unique Material Identifiers (UMID): country, organization

and user codes based on the SMPTE standard.

(A 188)

–

– –

Operating modes:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon EOS C200B Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Canon EOS C200B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info