615744
19
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
19
A user name and password are required before the Browser Remote application can access
and operate the camera. Initially, basic default user settings (user names and passwords) are
already saved in the camera and single-user operation (full control) is selected by default. You
can check these settings on the status screens (A 21).
With this procedure you can change the default settings, if you prefer, and select whether you
want to allow single-user operation (full control) or two-user operation (one controlling camera
functions and another in charge of metadata input).
[Full Control User] Can access all 3 Browser Remote screens: [v] (main camera
controls), [ ] (recording start/stop only) and [ ] (metadata input
screen).
[Camera Control User] Can access only the [v] screen. During two-user operation, this
would be the main operator controlling the camera.
[Meta Control User] Can access only the [ ] screen. During two-user operation, this
would be the person in charge of updating the metadata information.
1
Set the camera to mode and open
the [Users Settings] submenu.
[w System Setup] > [Network Settings] > [Browser
Remote] > [Users Settings]
2
Select [One User (Full Control)] or [Two
Users (Camera/Meta)] and then press
SET.
The current user login information will appear on
the screen. The actual passwords will be displayed
only for the default users settings.
To use the current settings, select [OK] and press
SET. The rest of the procedure is not necessary.
To change the user settings, select [Edit], press
SET and continue with the next step.
3
To change the [User Name] for the [Full
Control User] or [Camera Control User],
select [Input] and then press SET.
Enter the desired user name using the keyboard
screen (A 10).
Browser Remote: User Settings
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Canon EOS C300 Mark II wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Canon EOS C300 Mark II

Canon EOS C300 Mark II Kurzanleitung - Deutsch, Englisch - 42 seiten

Canon EOS C300 Mark II Bedienungsanleitung - Englisch - 223 seiten

Canon EOS C300 Mark II Kurzanleitung - Französisch, Italienisch, Spanisch - 42 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info